Page 103 - SuperSteam Catalogue 2015, Edition 2

HIGH PRESSURE JETS

Proper Usage & Care

To Switch ON the Hawk When Using the Hawk

(i) Plug in both the hose and trigger gun / contractor (i) Make sure that there is sufficient water going
lance to the machine and then turn on the water. into the Hawk high pressure jet. Incoming water
supply must be at least 11 L/min.

(ii) Let the water and air bubbles to flow out till the (ii) Always use the Hawk high pressure jet on level
water stream becomes smooth. ground and not on slopes.

Cleaning Machines (iii) Switch on motor.

(iii) Always spray downwards and downstairs

NEVER Switch on motor when there are still air
bubbles in the hose!

To Switch OFF the Hawk Avoid Extension Wires

(i) Switch off the motor first. With longer extension wires, the voltage (V)
decreases and causes the current (A) increase.
(ii) Turn off the water inlet. Such setting may damage motor due to the high
operating temperature. To avoid overheating, we
Always switch off motor first. Never leave motor recommend not to use extension wires with the high
running without water flowing. pressure jet.

TIPS

Hawk Components

Water High Pressure
Add Oil Here Outlet Coupling

Hawk Pump Pressure
from Italy Indicator

On / Off

Nicolini Motor

Transparent Water Inlet Water Inlet Front Wheel Thermal Water Puncture Proof
Oil Sight Filter Female with Brake Release Valve Rear Wheel
Glass Coupling

100