Page 148 - test1

STERILE BAGS

Surface Sampling Kits: Sani-Sponge KSS-61110
SANI-SPONGE with dehydrated sponge:
The Labplas SANI-SPONGE kit is designed to collect samples to detect the
presence of microbiological contaminations such as Listeria, Salmonella, E. coli, 1- Tear off the top of bag along the perforation.
and other food-borne pathogens on almost any surface. These kits are widely 2- Use pull-tabs to pull open the bag.
used in the food, public health and cosmetic industries. The SANI-SPONGE kit is 3- Hydrate sponge with buffer prior to removing it from the bag.
convenient and easy to use, and helps eliminate several time-consuming steps. 4- Take a sample by wiping the test surface with the hydrated
sponge; put the sponge back into the bag when done.
Labplas SANI-SPONGE sampling kits are produced in accordance with HACCP, 5- Hold bags by wire ends and twirl 3 to 4 times too close, fold wire ends inward onto bag.
USDA, ACIA and CFIA requirements.
Labplas SANI-SPONGE Sampling Kits come in two forms: Cat. # Description mil. in micr. Size (mm) Volume (ml) Packaging
KSS-61110 Dehydrated 2.5 63 4.5 x 9 in. (114 x 229) 15 oz (450) 400 (4 X 100)
sponge
Dehydrated
Dry Sponge KSS-61105 sponge with gloves 2.5 63 4.5 x 9 in. (114 x 229) 15 oz (450) 400 (4 X 100)
KSS-61110-NE Hydrated 2.5 63 4.5 x 9 in. (114 x 229) 15 oz (450) 100 (5 X 20)
®
TWIRL'EM Sterile Sampling bag with write-on strip containing a dry biocide-free sponge with gloves
Hydrated
cellulose sponge (1.5 x 3 x 5/8 in. when hydrated) KSS-61110-DE sponge with gloves 2.5 63 4.5 x 9 in. (114 x 229) 15 oz (450) 100 (5 X 20)
Hydrated
KSS-61110-PW sponge with gloves 2.5 63 4.5 x 9 in. (114 x 229) 15 oz (450) 100 (5 X 20)
Wet Sponge
TWIRL'EM Sterile Sampling bag including pre-moistened cellulose sponge, holding
®
10 ml of the buffer of your choice (Neutralizing buffer-sterile, DE Neutralizing
buffer-sterile, Buffered peptone water-sterile)
®
All Labplas SANI-SPONGE TWIRL'EM bags come with safety tabs. The puncture-
proof tabs eliminate the sharp points that can cause bag puncture and/or abrasions.
SANI-SPONGE kits are sterilized using gamma irradiation.
Water Sampling Kits
No more expensive rigid containers!

Labplas Water Sampling kits provide a quick and convenient way to collect
chlorinated water specimens. Our sterile Water Sampling kits contain a
nontoxic, nutritive tablet containing 10 mg of active sodium thiosulphate and
are UPA-approved for drinking water analysis. The sodium thiosulphate
instantly neutralizes halogen compounds (in this case chlorine) and enables
effective bacterial or organic testing.
Labplas Water Sampling kits are designed to collect, carry and contain
chlorinated water samples in aseptic conditions and are an economical and
efficient alternative to rigid sampling containers.

Characteristics:
Labplas Water Sampling kits are made with highly resistant FDA-approved
polyethylene. Key features are: maximum bag mouth opening to facilitate
the insertion of water sample, a convenient write-on strip and volume markings for measurements.
®
All Labplas Water Sampling kit TWIRL'EM bags come with safety tabs.
The puncture-proof tabs eliminate the sharp points that can cause bag puncture
and/or abrasions. Sodium
Cat. # Thiosulfate mil. in micr. Size (mm) Volume oz (ml) Packaging
Labplas Water Sampling kits are sterilized using gamma irradiation. Tablet
KWS-21100 1 x 10 mg 2.5 63 3 x 7 in. (76x 178) 4 oz (100) Cs/100
KWS-22200 3 x 10 mg 2.5 63 4.5 x 9 in. (114 x 229) 10 oz (300) Cs/100

146