Page 75 - test1

THERMAL CONDUCTIVE RACKS

Plastic Rack s All Simport ®
TM
tubes in the
Micrew Family
will also fit in
S700-475, -476, -477 these three S700-477
racks.
TM Microcentrifuge Tube Plastic Racks

Made of polycarbonate
An alternative to ice buckets for keeping reagents and enzymes cool. Great for a multitude of tubes such as Microcentrifuge
tubes with snap cap or screw cap (in all three racks) along with 1.2 and 2.0 ml Simport sample tubes (in rack S700-476).
®
Also protects critical samples from temperature fluctuations in the freezers. Base is filled with non-toxic gel. Will maintain
temperature for approximately 1 hour on the bench. Freeze for 24 hrs at -20°C to -25°C before use.
S700-476
Cat. # Wells Dimensions (L x W x H) Qty/Cs
S700-475 12 5.7 x 4.0 x 3.9 in / 15.5 x 10.1 x 9.8 cm 1
S700-476 20 8.25 x 6.4 x 4.4 in / 20.9 x 16.3 x 11.1 cm 1
S700-475
S700-477 32 8.9 x 5.0 x 3.8 in / 22.7 x 12.8 x 9.6 cm 1

S700-480

TM Microcentrifuge Tube
Plastic Rack
Made of polycarbonate

Base and cover are filled with non-toxic gel. Will maintain temperature for
approximately 2 hours on the bench. Alphanumeric grid for easy identification of
tubes. Also protects critical samples from temperature fluctuations in the freezers.
Freeze for 24 hrs at -20°C to -25°C before use.
Cat. # Wells Dimensions (L x W x H) Qty/Cs
S700-480 32 8.9 x 5.0 x 4.4 in / 22.7 x 12.8 x 11.1 cm 1

S700-490
PCR Plate & Strip
TM
Plastic Rack
Made of polycarbonate

This cooler is designed to protect enzymes & solutions by maintaining them at
temperatures between -20°C and -15°C up to 2 hours during sample preparations
on the bench. Base is filled with non-toxic gel. The aluminium block has 96 wells to
hold tubes, strips or plates. Freeze for 24 hrs at -20°C to -25°C before use.

Cat. # Wells Dimensions (L x W x H) Qty/Cs
S700-490 96 8.25 x 3.8 x 1.5 in / 17.3 x 9.6 x 3.2 cm 1

S700-600
Cryogenic Vial Cooler
TM
Made of polycarbonate – Cover made of HDPE
Used for cell cryopreservation and recovery, this cooler gives -1°C/min cooling rate
for up to 18 cryovials of 1 to 2 ml. The cooler needs 250 ml of 100% isopropyl
alcohol and should be placed in a mechanical freezer. mechanical freezer. Screw
top 120mm lid secures samples inside container. Vials never come in contact with
the alcohol.
Cat. # Wells Dimensions (L x W x H) Qty/Cs
S700-600 18 6.8 x 3.8 x 1.5 in / 17.3 x 9.6 x 3.2 cm 1

73