Page 98 - MTW JANUARY 2022 Digital Magazine

PRODUCT SHOWCASE

Chip Briquetting Machine from Oilmax

Metal Chip Briquetting Machine presses • Compacted bricks can directly be fed into
the metal waste under high pressure into a the furnace; hence there will be low power
briquette form. Normally it is used to reduce consumption in foundries
the storage cost and enhance the conversion
ratio in the furnace for metal recycling. Reduction in melting time which
Oilmax has supplied Chip Briquetting increases furnace utilization.
Machine to one of the leading manufacturers Also fumes and blasts are
of shock absorbers for the machining avoided in the furnace
process. The customer is reportedly very
happy with the performance of the machine. Performance:
• No. of bricks produced:
Benefits derived: 3,73,885 (Weight = 730
• Hygienic chip storage with reduction of grams/brick)
storage space by 75 or 85% • Total weight of bricks i.e. chips
• Accountability of chips for monitoring compacted: 261 Tonnes
• Reduction in transportation cost To conclude this product offers some major
• High selling cost of scrap as it is dried to benefits including a convenient method of For Product Enquiry Contact
achieve high recycle yield storage of chips unlike the conventional Oilmax Systems Pvt. Ltd
• Almost 90% of the oil has been recovered method, thereby also making it cost-effective 38/2/12, Narhe Dhayari Road
Narhe, PUNE 411 041
and reused which otherwise goes along for the users in many ways. It also contributes Phone: 020-2543 1052 /
with the scrap towards eco-friendliness by reducing the 093260 74504
• Less surface area to oxidize & become slag impacts of industrial waste. Email: mail@oilmax.co.in
www.centrifugaloilcleaner.com

Plates cut quicker and more accurately

with sliding table panel saw

A sliding table panel company’s busy factory.
saw has been well Vesconite stores manager Martin Nyathi
utilised since it was informs that a large number of plates and
installed late last strips have been accurately cut on the
year at Vesconite machine and expects the saw to be a great
Bearings’ warehouse asset in 2022.
in Johannesburg. The machine can cut lengths up to 3,700
The saw has mm long and 1,500 mm wide to an accuracy
mainly been used to of ±0.25 mm, so it can accurately and swiftly
cut Vesconite and cut the most-frequently-ordered plates that
Ultrablack wear plates Vesconite Bearings produces.
that are used in a
Vesconite stores manager range of wear applications.
Martin Nyathi expects a The introduction of the machine means
sliding table panel saw to the Johannesburg warehouse can dispatch
be a great asset in 2022 cut-to-size orders quickly, reducing the For Product Enquiry Contact
Martin Nyathi
longer lead times of having plates cut at the +27 11 616 1111

94 MACHINE TOOLS WORLD JANUARY 2022 www.mtwmag.com