Page 110 - CAT31D

Cutting Oil, Galvanize, Epoxy Coating
& Wasp Spray

Cutting Oil PC 6180

This non-flammable, water- based cutting oil improves metal cutting operations and
increases efficiencies in machining operations.

CAT. NO. UPC CAN SIZE (NET) STD MSTR WT/STD
890 00890 16-oz. Aerosol (13-oz.) 12 14.00#
Features:

• USDA H-2 • Prolongs Tool life, Reduces
• Reinforced With High- Tool Sharpening And Down
Viscosity Oils And Sulfur- Time
Free Extreme Pressure • Lubricates And Cools At The
Additives Cutting Point

Zinc Rich Galvanize PC 6180

Ideal for use on surfaces that are exposed to severe corrosive conditions including
structural steel, fencing, automobiles, guard rails, and bridges.
CAT. NO. UPC CAN SIZE (NET) STD MSTR WT/STD
7007 07007 16-oz. Aerosol (13-oz.) 12 14.00#
Features:

• Contains 97% Pure Zinc • Meets ASTM B-117-64 Salt • For Temperatures Up To 200˚F
Metallic Powder, Which Yields Spray • Passed Preece Test For Hot-
94% Zinc And 6% Resin Dry • Meets MIL-P-46105 & DOD-P- Dip Galvanizing
Film 21035A • Stops Rust On Steel & Iron
• Sacrificial Anodization

Red Insulating Epoxy PC 6180

A tough flexible coating that protects and insulates exposed wires and electrical
windings.
CAT. NO. UPC CAN SIZE (NET) STD MSTR WT/STD
401 00401 16-oz. Aerosol (12.5-oz.) 12 14.00#
Features:

• Dries In 15 Minutes; Hard in • Excellent Adhesion, High Arc • Resists Oil, Water, Acids,
1 Hour Resistance Alkalis
• Dielectric Strength Up to • Class F Thermal Resistance • Penetrates, Coats/Seals In
2,270 V/mil One Step
Chemicals & Tape
Hornet & Wasp Spray PC 6180

Fast-acting powerful aerosol saturates instantly to eliminate hornets, wasps, and
yellow jackets.
CAT. NO. UPC CAN SIZE (NET) STD MSTR WT/STD

863 00863 20-oz. Aerosol (15-oz.) 12 17.00#
Features:

• USDA F-2 • High % Active Ingredient • EPA Reg. No. 1021-1649
• Sprays Up To 20 Ft. • High Dielectric Strength of • Lasting Residual Deposit
• High-Delivery Valve 41kV/mm Prevents Reinfestation For
Weeks
D18
CELEBRATING 50 YEARS