Page 43 - Catalog_SYSBEL Brochure - 2021 Version

37 Special Protective Products Eye/Face Wash / Shower head 38

Eye/Face Wash

SYSBEL's new nozzle heads colligate traditional aerators and spray
heads with holes. Zero velocity point provides more comfort and control for
effective sweeping hazardous contaminants away from the face and eyes It complies with the regulations in ANSI Z358.1-2014
using a soft aerated stream for eye wash and independently angled face standard and OSHA 29 CFR 1910.151(C) issued by ANSI
wash stream for optimum coverage. This series of products fully complies has acquired CE Certification
with ANSI Z358.1-2014 and AS 4775-2007, and has been tested and
Special Protective Products approved by CSA.
• The unique nozzle design is adopted. The same height can be maintained
SYSBEL There are many dangers in the production, scientific research, teaching and other operations, which threaten the under certain water pressure, to avoid the operating obstacles caused by
personal safety and health of the operator. SYSBEL's special protection series products are a kind of defensive equipment for water pressure.
the operator during the operation process. Health provides better protection. • The nozzle can be used for spraying two kinds of water at the same time,
SYSBEL special protection series products include but are not limited to the following types of products: eye and face protection with balanced heights. The water flow is steady and uniform due to the
products, first aid kits, safety mats, anti-collision system products, etc. built-in flow limiter.
• The aerator with a coin slot is easy to remove and install, and thus simple
to clean and maintain.
• The dust-proof cover can protect the nozzle from being contaminated by
dust in the air. Once the eyewash is started, the dust-proof cover will be
opened automatically under water flow. Height-balanced flow
• The copper nut is built in the 304SS nozzle base and connected to the
horn elbow, and its strength is enough to allow repeated removal and
installation and ensure longer service life.
• The nozzle is made of AES engineering plastic which is superior to ABS
engineering plastic, and has outstanding features of weather resistance,
high rigidity, corrosion resistance, UV resistance, etc.
• The main fittings and other accessories are made of 304 stainless steel
and applicable to adverse workplaces.
• The bright yellow plastic is used to facilitate observation and identification.
• The quick connector is equipped with a built-in filter to prevent debris Independent
aerated
or impurities from flowing into the nozzle, in order to avoid secondary streams for
damage to the eyes. In addition, the connector is easy to operate, which is rinsing eyes
conducive for cleaning and maintenance on a regular basis. softly
• The eye/face wash series fully comply with ANSI Z358.1-2014 and AS
4775-2007, and has been tested and approved by CSA.

Shower head

SYSBEL 's safety showers provide conical water pattern and gently deliver large volumes of water to realize complete decontamination without
injury to skin. It ensures the fastest,most effective removal of contaminants in emergency. The shower equipment complies with the standand of
ANSI Z358.1-2014 and approved by CSA.

Flow regulator in shower arm provides a minimum of
20gpm(75.7LPM)

SPP Special Protective Products

Impeller action shower Curved shape creates
in shower head optimal spray pattern

NOTE:
Spinkler head features flow regulator (exceeds minimum water flow of 20 GPM (75.7LPM) at 30 PSI (2.0 bar))in shower arm pipe, which not only
delivering adequate and stable flushing fluid ,but conserving water as well as helping users to decontaminate more effectively.

www.sysbel.com www.sysbel.com