Page 31 - AQ242MP CAL-2242-C1-0519-Water Filters Seminar
P. 31
MEDIA REPLACEMENT CHARGING THE SYSTEM
• Charging improves water flow and avoids “run-on”.
• Always “charge” the cartridges (system) with water after removing them for any reason.
1 First run water through the
system for about 2 minutes to
saturate the media.
2 the pre-filter cartridge from the
2 Remove the inlet assembly and
top of main filter cartridge.
3 Pour water into the top hole to fill
the main filter cartridge.
4 Re-install the pre-filter
and again pour water into the
top hole of pre-filter cartridge
until it is full; reconnect the inlet
assembly.
Page 42
Watch the video
Excercises 13-14
AQ242MP CAL 2242.C1.0519 | 31
