Page 311 - 2018 Master Catalog

“DIAMOND STRIPPER”
SCREEN WINDAGE TRAY
SOLID LOUVERED TRAYS Exclusive design features hundreds of small louvers that quickly scavenge oil from
Specially contoured solid trays with louvers that permit rapid return of oil to sump. crankshaft rotation, but prevents splash back common to screen-type windage trays.
This windage tray provides optimum protection against oil splash-back, and provides Fit left and right side dipsticks, as the dipstick will go underneath the tray.
increased power. Ideal for all street and strip applications.
PART NO. DESCRIPTION
PART NO. DESCRIPTION
32250 Small Block Chevy - 350 & 400
32100 Small Block Chevy - 350 - Left Side Dipstick 32260 Big Block Chevy - Mark IV, V, & Gen VI
32150 Chevy LS Series, Full Length
32200 Big Block Chevy - All, Mark IV, V, & Gen VI
WINDAGE TRAYS
- MOPAR WEDGE & HEMI
MAGNETIC DRAIN PLUG PART NO. DESCRIPTION
Super strength magnet draws any metal particles out of the oil
flow before they can scare your bearings on the way to the filter. 32000 Chrysler Wedge and Hemi
1/2”-20 fine thread fits all Milodon pans, except marine applications. 32005 Chrysler Wedge and Hemi for up to 1/2” strokers
PART NO. DESCRIPTION
WINDAGE TRAY INSTALL KIT
17000 Milodon & Most Other Oil Pans
Required to properly mount the tray assembly, ad-
justable mounting position allows the tray to work at
its maximum potential by being as close as possible
ONE-PIECE to the rotating assembly (min.100”) and to avoid any
PAN GASKETS unnecessary interference with the oil pan.
PART NO. DESCRIPTION
PART NO. DESCRIPTION
81150 Small Block Chevy set
41000 Small Block Chevy, 1955-79 81151 Big Block Chevy set
41010 Small Block Chevy, 1955-79 - Notched for 4” Stroke 81190 Ford 429 & 460 set
41001 Small Block Chevy, 1986 & Up
41008 Small Block Chevy, Dart SHP Notched for 4” Stroke
41012 LS Chevy LS SERIES CHEVY KIT
41002 Big Block Chevy, Mark V & Gen VI 8.2L This complete kit consists of a remote filter
41011 Big Block Chevy, Mark IV
41003 Ford 302 / 5.0L housing, which uses a Ford /Chrysler type
41004 Ford 351-W / 5.8L filter, & (2) 36” 300 PSI working pressure lines
41005 Ford 429, 460 / 7.5L & all necessary aluminum AN fittings.
41007 Chrysler 360 PART NO. DESCRIPTION

21575 Complete Chevy LS / Gen III Kit
CRUSHPROOF PREMIUM
QUALITY PAN GASKETS
PART NO. DESCRIPTION LS SERIES OIL FILTER
MOUNT
40100 Small Block Chevy, 1955-79
40105 Small Block Chevy, Notched for 4” Stroke PART NO. DESCRIPTION
40450 Ford 390-428
40700 Big Block Chrysler, 383-440 21580 Use with #31507, #30915, or #30916 Oil Pans
40750 Chrysler, 5.7 / 6.1 Hemi (Pair)
BILLET STAINLESS STEEL
CHRYSLER OIL PRESSURE ENGINE DIPSTICKS
REGULATOR PART NO. DESCRIPTION
Permits oil pressure adjustment externally even when the engine is running. Very
valuable asset for dialing-in desired oil pressure, for compensating for low oil pres- 22000 Small Block Chevy - Up to 1979
sure on street application or excessively high oil pressure on the track 22005 Small Block Chevy - 1986 & Up
22006 Chevy LS Series, All
PART NO. DESCRIPTION 22010 Big Block Chevy - Mark IV, V, & Gen VI Pans
22040 Ford 302 / 351W / 429-460 in Oil Pan
21550 Chrysler Wedge and 426 Hemi 22070 Big Block Chrysler - 383-440, Center Sump
311