Page 879 - Davidsoins catalog

MARINE

On/Off Rocker Switch
Sleek, low profile design features a plas-
tic switch and housing. No mounting Volt Marine Circuit Breaker With
hardware required. Snap mounts in a 13/16" x 1-7/
16" hole. Uses standard female disconnect wire ter- Automatic Reset M
minals. On/Off great for lights, aerators, bilge pumps. On/Off/On is For installing trolling motor and winches. Will automatically reset A
great for navigation lights and anchor lights. On/Off/Mom is great for itself. Better that a fuse which can blow and ruin a fishing trip. R
lights and a horn. Illuminated rocker switches have the same fea- Includes nuts, washers, mounting hardware and 8 ga ring terminal.
tures with a addition of an illuminated power on indicator. Skin Carded. I
ILLUMINATED ROCKER SWITCH Order No. Mfg.# Description Code Retail $ N
Order No. Mfg.# Description Code Retail $ 2319-0032 350 50AMP 62177 10.49 E
3089-0034 BR51350 ILLUMINATED ON/OFF (RED) 36041 10.99
Trolling Motor Transducer
Brackets
Battery Cut Off Switch Allows transom transducer to be mounted on trolling
On-off switch with removable key. motors. Made of marine grade aluminum, black pow-
der coated. Fits transom transducers made by Low-
rance, Eagle, Hummingbird, Bottom Line and Zercom.
Fits Minnkota and Motorguide trolling motors. Header Carded.
Order No. Mfg.# Description Code Retail $ Order No. Mfg.# Description Code Retail $
3089-0014 BR51030 SWITCH 410016 25.99 2319-0335 300 FOR TROLLING MOTORS 362516 23.99

Fuse Holder Horizontal
ATC fuse holder protects on board electron- Transducer Plate
ics. Takes up to a 30 amp fuse. Waterproof. Mounting transducers and
paddle wheels now simple and easy. Perfect mounting surface for
Order No. Mfg.# Description Code Retail $ installing, removing, or adjusting transducers to get the maximum
3089-0241 BR51405 FOR ATC STYLE FUSES 20128 6.99 performance from your fish locator. Made from Light Gray starboard
marine grade polymer sheets. Won’t warp, corrode or be affected by
sunlight. Mounts with only 2 screws provided. Skinned Wrapped.
Led 4-Switch Panel
Order No. Mfg.# Description Code Retail $
This panel features booted toggle 2319-0330 920 12" HORIZONTAL 620316 20.99
switches, push button re-set breakers,
LED indicator lights when power is on to switch.
Panel rated at 12 volt, 10 amps per circuit. Panel Float Switches
measures 5"X4½". 2-1/4" of space needed behind Snap switch design tested to
panel for mounting. Extra labels included. over one million cycles. Highly abrasion resistant
Order No. Mfg.# Description Code Retail $ marine grade "blocked" wire. Removable base for
3089-0243 BR51408 W/BREAKERS & BOOTED TOG 991030 46.99 easy installation and cleaning (models 35A &
37A). Exclusive Rule moisture tight seals and
grommet. Environmental friendly mercury free
Trailer Wire Connector design.
Order No. Mfg.# Description Code Retail $
Includes both male (trailer) and female
(trunk) ends. 0155-0039 35A RULE-A-MATIC 622130 54.99
0155-0041 40A RULE-A-MATIC PLUS 620041 64.99
Order No. Mfg.# Description Code Retail $
3089-0281 BR59386 5-WAY 15041 8.99 CHARGERS, MARINE BATTERIES &
ACCESSORIES
Trailer Connector
Connect your round vehicle socket to the Battery Boxes
flat harness on your trailer. Made of rigid polypropylene,
impervious to battery acids. Lightweight and
Order No. Mfg.# Description Code Retail $ vented. Meets U.S. Coast Guard Specification No.
3089-0282 BR5939 7-ROUND TO 4 WIRE FLAT 20341 9.99 183.420 as an O.E.M. installed battery hold-down
3089-0283 BR5939 7-RND TO 5 WIRE FLAT W/ LEAD 99777 13.99
system.
Trailer Coupler Safety Pin Order No. Mfg.# Description Code Retail $
Quick and easy way to secure the latch on 0156-0001 9065-1 STANDARD/BLACK 57277 10.99
your trailer coupler. 0156-0002 9067-1 27 SERIES/BLACK 36689 12.99
Series 27 Battery Holder
Order No. Mfg.# Description Code Retail $
3089-0284 BR59401 SAFETY PIN 9992 2.99 A simple-to-install battery holder that
fits into a limited space. For batteries up to 10-1/2" in
Trailer Receiver Hitch height. Provides simple installation for changing or
replacing batteries. The polypropylene hold-down
Pin strap has a positive locking, quick disconnect buckle.
Secures the trailer draw bar to Molded base mounts with four #10 panhead screws.
most hitch receivers. Included clevis pin. 24 series: 7" L x 11"W. 27 Series: 12-3/8" L X 7-1/8"W.
Order No. Mfg.# Description Code Retail $ Order No. Mfg.# Description Code Retail $
3089-0285 BR59416 PIN WITH CLIP 5/8" 83430 7.49 0156-0073 9093-5 27 SERIES W/BUCKLE STRAP 78065 8.99

BRS East ’17 * Denotes New Products
879