Page 567 - CarrLaneCatalog_2019ed-c.pdf

SERRATED PRESS FIT BUSHINGS – METRIC

ID RANGE OD ANSI
(G6) (h5) LENGTH PART NO.
6mm SPM-5-6
1.00-1.80mm
5mm 9mm SPM-5-9
1.81-2.60mm 5.000-4.995mm 6mm SPM-5-6 System for Fast Fixturing
9mm SPM-5-9
8mm SPM-6-8
6mm
SPM 2.61-3.30mm 6.000-5.995mm 12mm SPM-6-12 PROBLEM:
16mm SPM-6-16
8mm SPM-7-8
7mm “We are an aerospace prototype shop making the
3.31-4.00mm 12mm SPM-7-12
7.000-6.994mm transition from prototype to production on an important
16mm SPM-7-16 UAV project. We’ve developed elaborate fixturing of all
8mm SPM-8-8
8mm shapes and sizes. We found ourselves leaving our trim
4.01-5.00mm 12mm SPM-8-12 fixtures set up on a large gantry style table and then
8.000-7.994mm
16mm SPM-8-16 having to tear everything down when a large part came
10mm SPM-10-10
10mm along to make way for it.
5.01-6.00mm 16mm SPM-10-16
10.000-9.994mm
20mm SPM-10-20 This tied up one of our most valuable spindles, and dust
10mm SPM-12-10 collection was nearly impossible. Change over and setup
12mm
6.01-8.00mm 16mm SPM-12-16 times were totally out of control.”
12.000-11.992mm
20mm SPM-12-20
12mm SPM-15-12
15mm
8.01-10.00mm 20mm SPM-15-20
15.000-14.992mm Machine Operator Tyler
25mm SPM-15-25
12mm SPM-18-12 Vaughn, of the Flying S,
18mm
10.01-12.00mm 20mm SPM-18-20 places a carbon trim fixture.
18.000-17.992mm ®
25mm SPM-18-25 The Carr Lock receiver
16mm SPM-22-16 bushings allow for fixtures in
22mm
12.01-15.00mm 28mm SPM-22-28 various configurations.
22.000-21.991mm
36mm SPM-22-36
16mm SPM-26-16
26mm
15.01-18.00mm 28mm SPM-26-28
26.000-25.991mm SOLUTION:
36mm SPM-26-36
“I discovered that I could combine
80% of our trim fixtures into just
one fixture plate using just two
Carr Lock pins, with excellent
locating ability and much better
Exclusively clamping than before.
Made in the
Our setup times have gone from
USA an average of about 25 minutes
to literally 30 seconds, thus
saving us hundreds of hours.”
Peter Bowman
Production Manager/Mfg Engineer
Flying S Inc.
www.carrlane.com/carrlock/annnnneeeeeane
www.carrlane.com/carrlock kkkkkkkkcccccooooommmmm////////cccccaaaaarrrrrrrrrrlllllllloooooccccckkkkkkkkcom/carrlock
See Pages 343-360
13

www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 565