Page 21 - Avenger Submittal reduced

AS2010-00

Fixed Temp / Rate of Rise Heat Detector

Standard Features Operation

• Low Profile - Only 2.0” high, including The AS2010 incorporates a highly linear
base thermistor circuit. The specially designed
cover protects the thermistor while allowing
• Simple and reliable device addressing maximum air flow. The thermistor circuit
method produces a voltage proportional to the
temperature; this information is transmitted
• Uses the noise Immune Digital to the control panel as a digital value. When
Communication Protocol (DCP), the ambient temperature exceeds a
which utilizes interrupts for fast preprogrammed threshold (fixed temp or
response to fires. rate of rise), the sensor transmits an interrupt
• Rate of Rise temperature threshold = to the control panel indicating a fire alarm.
15°F/Min (determined by panel) The fire alarm control panel can adjust the
sensor’s fixed temperature threshold for
• Adjustable threshold temperature= different installation requirements.
135°F -190°F (determined by panel)
Up to 127 devices may be installed on each
Application SLC loop. The sensor address may be set by a
hand-held programming unit. The sensor
mounts to an electronics-free base and
The AS2010 Fixed Temperature / Rate of incorporates a locking mechanism for
Rise sensors provide accurate temperature security. The base provides mounting slots,
measurement data to the fire alarm control terminals for field wiring and a third terminal
panel. These sensors are well-suited for for a remote indicator/ LED. The sensor has
environments where dust, cooking fumes dual LEDs for easy viewing of the sensor
or other factors make the use of smoke status.
sensors Impractical.

Note:

Bases are not included

with detectors, please

order separately.

Fire Detection System by Avenger, Las Vegas, Nevada 89141 U.S.A. I Phone: 1-702-513-4654
info@avengersystems.com I www.avengersystems.com
VERSION 3.01 - 2017/09