Page 144 - 2017 Product Guide

ABLAZE MIRRORS | THERMOMIRROR DEMISTER

Does your mirror fog up? The clear solution is Thermomirror!

Thermomirror is the easy way to add that little bit of extra luxury and usability to your bathroom. The thin demister pad is
adhered to the rear of your mirror and connected to your light switch or a movement sensor. Thermomirror prevents condensation
on your mirror and gives you clear visibility even after a hot bath or shower. Custom sizes available for projects (min qty apply).
Thermomirror emits heat and it
Benefits of Thermomirror is important to provide adequate

• Use your mirror straight after a hot bath or shower and improve the insulation especially when installing
bathroom experience into cavity walls. Econoboard Insulation
is recommended (See page 145) to be
• Self Adhesive – Simply sticks to the back of your mirror
installed behind the Thermomirror to
• Ultra-thin (Only 0.4mm thick) and unobtrusive to remain discreet yet achieve optimal performance.
effective
• Easy installation into your existing lighting, underfloor heating or movement
sensor circuit
• Use multiple pads in parallel to cover larger mirrors with ease
• No bulky transformers, simply connect to your existing circuit
• Moisture resistant and will not deteriorate due to vibration or ageing
• Economical as it consumes less power than the average light bulb
• Perfectly safe for use in bathrooms when installed in accordance with local
electrical regulations and has an IP54 Protection Rating PIR Movement Sensor
• Can be wired up, to switch on automatically with your light switch, PIR STOCK RRP EXCL RRP INCL
NO
$
$
movement sensor (5264 – Pictured) or Dual Controller (5245 – See Pg.42)
5264 90.00 99.00

144 WWW.THERMOGROUP.COM.AU | TO ORDER CALL 1300 368 631 | SALES@THERMOGROUP.COM.AU