Page 587 - Deko-Light Light Impressions 2019-20
P. 587
EV-01-08 | EV-01-12 Tile-Profiles | Mounting Profiles | Corner inside
for LED Stripes up to 9,3 | 13,3 mm width
EV-02-08 | EV-02-12 Tile-Profiles | Mounting Profiles | Corner outside
for LED Stripes up to 9,3 | 13,3 mm width
INFORMATIONS | ADVANTAGES FIXATION
in up to 3 different looks for optimal mounting a flexible tile adhesive and flexible
and 2 different lengths [1.25m | 2.5m] nut grout is recommended
designed for a tile strength of max. 10mm | 12mm the flexible tile adhesive must be applied with a notched
can be easily shortened according to the requirements trowel
high quality Aluminum profile with high form and fitting the surface should be kept clean and dust-free and
preciseness treated with an adequate adhesive primer for an optimal
for the lighting of indoor areas and durable result
IP20, not fit for traffic
optimal adhesive surfaces for LED stripes PLEASE Note: The tile profiles are only suitable for wet cells
in combination with suitable IP stripes or special casting
profile and cover offer protection by external effects techniques. It is also recommended to create a water-
passive cooling of LED Stripes increasing service life impermeable finish at the top and bottom with an acrylic or
homogeneous light effect silicone joint.
no glare by fitting covers
586 ALUMINUM PROFILES | Tile-Profiles
