Page 27 - Patchwork & Quilting - UK (February 2020)
P. 27

PROJECT // liberty fans


                  illust. 4. Sashing


















                  a. Fold pattern down and align strips for   b. Continue adding strips in number order  c. Add last strip
                  patches 1 and 2
                                 illust. 5. Sashing strips






















                                 a. Trim excess fabric                b. Cross cut pattern into sashing strips


                  9. Follow steps 2 to 6 with second set of   and 2, open out and carefully finger   4a. Take two, 3½" Straw Linen
                  fabrics to make second set block, illust. 3.  press seam.             Texture strips and trim strips so they
                  10a. Trace sashing foundation pattern   12a. Continue adding strips in number   measure 3½" x 29½".
                  given full size on page 30 eight times   order, illust. 4b.           b. Adjust length of strips to fit your
                  onto foundation paper.              b. Add strips from set two in number   quilt as necessary.
                  b. Cut out each pattern roughly.    order until pattern is complete,   c. Add strips to opposite sides of
                                                      illust. 4c.                       quilt top.
                           EDITOR'S TIP               13a. Trim excess fabric back to outer   5. Trim remaining two, 3½" Straw
                                                      seam allowance lines, illust. 5a.  Linen Texture strips so they measure
                    I found it easier to trim the     b. Cross cut joined strips into four,   3½" x 28½", again adjusting length
                    sashing foundation patterns back   1½" cross cut slices, illust. 5b.  of strips to fit your quilt and add to
                    to the outer seam allowance lines   c. Do not remove papers at this stage.  top and bottom edges to complete
                    after piecing each pattern.                                         quilt top.
                                                      ASSEMBLY
                                                      1a. Refer to quilt layout and arrange   COMPLETION
                  11a. Take one, 1¼" x 6¾" strip cut from   blocks into four rows of three blocks,   1a. Make quilt sandwich with quilt top,
                  fabric 1 from set one and position strip   alternating blocks.        wadding and backing.
                  on unmarked side of pattern so that   b. Add sashing strips and 1½" brown   b. Pin or baste layers.
                  it will cover all of patch 1 plus seam   squares.                     2. Quilt as desired. I outline quilted my
                  allowances.                         2a. Join blocks and sashing strips   fans in a fan shape and added denser
                  b. Pin in position.                 together in rows.                 quilting to the backgrounds to make
                  c. Fold pattern back along line between   b. Join rows together taking care to   the fans stand out more.
                  patches 1 and 2 as before and place   ensure vertical sashing strips are   3. Double bind edges with 2¼" brown
                  one, 1¼" x 6¾" strip cut from fabric 2   aligned.                     strips.
                  from set one right sides together with   3. Press quilt top and carefully remove   4. Add a hanging sleeve and a label.
                  patch 1 fabric strip, illust. 4a.   foundation papers if you have not
                  d. Stitch along line between patches 1   already done so.             Enjoy!

                                                                                                                         27
   22   23   24   25   26   27   28   29   30   31   32