Page 38 - revista2019-final_Neat

Conference onference –– InternationalInternational
C
Conference Conference –– InternationalInternational
1. Apoorva S and Suresh Chandra Khandai, “Computational Characterization of a CD Nozzle
with Variable Geometry Translating Throat”, Innovative Design, Analysis and Development
Practices in Aerospace and Automotive Engineering (I-DAD 2018), Springer, Veltech
University, pp 11-20, Dec 2018.

2. D.K.Mothilal, E.A.Shebinraaj and P.K.Dineshkumar, “Influence of solid lubricant Boron Nitride
on mechanical properties of PEEK polymer”, International Conference on Green
Manufacturing: Analysis, Automation, Process, Products, Energy & structures – GMAAPPES
2018, Rajalakshmi Engineering College, Chennai, Tamil Nadu, India, 28-29th March,2018.

3. KarthickSundar.R, DhineshKumar.K, KirubaShankar.M and BalajiRajendran Fabrication and
thermal study of Carbon nanoparticle particle infused GFRP composite, Proceedings of, India.
International Conference on Automation and Computing Technologies (ICACT-18), Vellamal
Institute of technology, 17 March 2018

4. ManishKumar.V, Srinath. K, and Mr.Ezhilmaran.G, ‘Thrust vector control of supersonic flow in
a Rectangular Nozzle using movable plates’, International Conference on Green
Manufacturing: Analysis, Automation, Processes, Products, Energy & Structures (GM: AAPPES
20018), Rajalakshmi Engineering College, Thandalam, Chennai, 28 March 2018.

5. Selvamuthukumaran.V,Narendiran.B&Mr. Surendra Bogadi, “Spread Characteristics of
supersonic Jet”, in “International Conference on Green Management: Analysis Automation
Processes, Products, Energy & Structures (GM: AAPPES)” Conducted at Rajalakshmi
Engineering College 28 March 2018.

6. Saji M, Selvamani M, Velmani M and Mr. Surendra Bogadi ‘Experimental Investigation of
Mixing Enhancement by Ramp Induced Vortices in Supersonic Rectangular Nozzle’,
International Conference on Aeronautics Astronautics and Aviation (ICAAA’18), Dhanalakshmi
Srinivasan College of Engineering and Technology, Mamallapuram, Chennai, 28 March 2018.

7. Saji M, SelvamaniM, VelmaniM and Mr. Surendra Bogadi, ‘Farfield Noise Measurement of
Supersonic Rectangular Diagonalwise Expansion Ramp’, International Conference on Green
Manufacturing: Analysis, Automation, Products, Energy & Structures (GM: AAPPES 2018),
Rajalakshmi Engineering College, Thandalam, Chennai, 28 March 2018.
8. Aravind S, Jeffrey AntoMaario Y,Sarwin Kumar S and Lakshmi Priya V, “VTOL Performance of
Delta Winged Drone”, POWERIT 18, Rajalakshmi Institute of Technology, Chennai, India,
2018.

9. Jeya Chithra.K, Kanimozhi.P, Mohideen.P, and Mr.R.Balaji Rajendran, presented the paper
“Investigation and crack growth studies on a hybrid laminate” International conference on
Green Manufacturing: analysis, automation, processes, products, energy &structures
(AAPPES), Rajalakshmi engineering college, Thandalam, 28 March 2018.
10. MonishaKalpana.V, Ragu Priya.R, ThillaiAnanthi.N., Suresh Chandra Khandai, “Lab Scale
Subsonic Ramjet Engine Powered By green Technology”, “International conference on Green
Manufacturing: Analysis, Automation, processes, Products, Energy & Structures (GM:AAPPES
2018)”, 28th& 29th March 2017, organized by “Rajalakshmi Engineering College”, Chennai,
India, 28 March 2018.

11. UdhayaKumar.K, PavithraBalan.S and Mr.Ezhilmaran.G “Supersonic Jet Control By Tabs With
Slanted Perforation”, International Conference of Green Manufacturing: Analysis,
Automation, processes, Products, Energy & Structures (GM:AAPPES 2018)”, organized by
“Rajalakshmi Engineering College”, Chennai, India, 28th& 29th March 2018.

25