Page 14 - BALZER Catalog 2020

Tidec 8600 F

with
reLease CLip

Tidec 8600 F… a perfect feeder reel!
With the revolutionary line clip.

The flagship among our feeder reels is, of course, equipped with our rev-
olutionary Release Clip with which the line is released when big fish bite,
thus preventing the line from breaking: All feeder anglers have experienced
this situation: There is a strong bite by a carp or barbel: the line is stuck in the
line clip in order to limit the cast so that the drag is blocked and the leader
torn. This can’t happen anymore thanks to the revolutionary release clips
from Michael Zammataro and Julian Feuerlein!
This line clip releases the line when stronger fish bite so that the drag is re-
leased immediately after the bite.
The slow oscillation worm-shaft gear with a delayed stroke ensures ex-
cellent cross-wise line lay even with the thinnest braided lines.
The CNC, mill-cut aluminium crank can be screwed firmly into the corpus
and thus has no backlash.
The Lazy Rotor system automatically fixes the rotor in place as soon as
the bail folds down, so that it does not inadvertently turn during the cast.
However it is not completely blocked, so that fine adjustments are still
possible before the cast.
The bail Fix system enables the bail to click in when it is turning over,
thus preventing it from inadvertently folding down during the cast.
Still equipped with the rubber-buffered and spring-loaded safety Line
clip.

We offer a further spool with a greater line capacity.
proteCted by
utiLity patent
• 7 precision stainless steel ball bearings plus 1 needle bearing (extra large)
• Chrome-plated brass worm shaft gear for a super long strike and
crosswise line lay: ideal for braided line
• Release clip, especially rubber buffered - protected by utility patent
• 10 additional Release Clips included
• Lazy Rotor System: fixes the rotor when the bail folds
• Rubber-buffered and spring-loaded Safety Line Clip
• Total-Tolerance Control System (T.T.C.): all tolerances in the crank,
gear and drag are reduced to a minimum
• Quick-Stop-System (Q.S.S.) for stopping rotor instantaneously
• Strong-Bail-Concept, bail made of strong, lightweight aluminium
• Bail-Fix-System, no unwanted bail backlash during casting
• Extra strong stainless steel main axle Lazy Rotor System: fixes the
• Anti-Swing System (A.S.S.), prevents inadvertent vibrations rotor when the bail is folded,
• Finely adjustable front drag (S.D.S) with extra large brake discs preventing it from twisting
• CNC mill-cut aluminium power crank before or during casting
• Anti-twist line roller

Line clip which releases the line when stron-
ger fish bite so that the drag is released im-
mediately after the bite.
tip:
Fix the line as usual in the clip, then wind
in 1 turn and set the brake to low braking
force. Still equipped with the rub-
ber-buffered and spring-
loaded Safety Line Clip.

TIdec 8600 F TIdec 8600 F ALuMINIuM spARe spooLs wITh ReLeAse cLIp
Item- order- Line capacity weight gear Item- order- Line capacity Spare spool
No. No. Ø mm g ratio No. No. m Ø mm for:
103260 /860 250 0.10 585 4.8 : 1 /860 250 0.10 flat spool for braided line
193260
/861 300 0.25 lower spool for monofilament line

11
11