Page 15 - IM_3337(Q40G)(EN.ES.FR)(160410).pdf
P. 15
GETTING READY TO SEW 2
Automatic Needle Threader
⚠ For safety, turn off the power before using the automatic needle threader.
1. Raise the needle to its highest position by
turning the handwheel toward you. If you turn
the handwheel backward, the machine will jam
when you start to sew.
2. Pass thread around thread guide.
3. Press lever down as far as it will go.
4. The threader automatically swings to the
threading position.
5. Pass the thread in front of the needle and under
the hook.
6. Release the lever & the thread tail at the same
time, this will form a loop at the back of the
needle.
7. Pull the thread through the needle eye.
¤ Pull about 6-8” of thread to the back beyond the eye of the needle. This will help prevent the
needle from becoming unthreaded when you start to sew.
15
