Page 2 - Q3 2018 Tools News

Air Denibbing Sander

 Small 1.25" (30mm) pad size for isolated spot focus sanding and denibbing clear coat
instead of redoing entire areas.
 Ultra compact right angle design for comfortably reaching tighter and more compact
areas and contours
• Motor: 1/3hp
• Sound Level: 89 (dB)
16pc Hand Impact Driver Set • Max Speed: 8,000RPM
• Overall Length: 6.3" (160mm)

 Flathead: #5, #6, #8, #9
 Hex: 4mm, 5mm, 6mm, 8mm #AST-332
 Phillips: #1, #2, #3, #4 SPECIAL
 3" Long Phillips: #2, #3 $94.99
 1/2" SQ. to 5/16" Hex Adapter
 Impact Driver

#AST-9517
SPECIAL Adjustable Blind Inner
$19.99 Bearing Slide Hammer Puller

 For bearings and bushings with 0.75 – 2.3" inside diameter or up to 2.0" when pulling
from outside diameter
 Jaws remain in a straight extended orientation when adjusted and are made from
forged CR-V
 2.5lbs sliding hammer, 5.9lbs total weight
450pc Automotive  Material: Forged Chrome-Vanadium
 Length: 22.25"
Wiring Terminal Connector Kit  Weight: 5.9lbs

Includes: #AST-78410
 Male & Female Open Barrel Disconnectors AWG22-14 SPECIAL
 Ring Open Barrel Disconnectors #10 & #1/4 AWG22-14 $79.99
 PVC Covers for Male & Female Bullet and Female Open Barrel Disconnectors
Insulated + Non-Insulated:
 Male & Female Disconnectors AWG22-14
 Ring Terminal #6, #8, #10 & #1/4 AWG22-10
 Spade Terminal #6, #8 & #10 AWG22-14
 Butt Connectors AWG22-10
Insulated Only: NANO Impact Socket Sets
 Bullet Connectors AWG22-14
 Fully Receptacle Disconnectors AWG22-14  At 1.10" (28mm) long, sockets are 37% shorter than shallow impact sockets and 15%
 DIN Nylon Miniature Ring Terminals #6 & #8 AWG26-22 shorter than other stubby impact sockets.
 DIN Nylon Miniature Spade Terminals #6 & #8 AWG26-22  All sockets feature a 22mm (7/8") outside hex for increased access when used with a
 Nylon Flag Terminals AWG22-14 wrench.
#AST-9475 #AST-78310 #AST-78211
SPECIAL
$39.99 (3/8” Dr., 10pc SAE) (1/2” Dr., 11pc SAE)
 1/4” through 3/4”
 3/8” through 1”
$29.99 $39.99
#AST-78314 #AST-78215

(3/8” Dr., 14pc Metric) (1/2” Dr., 15pc Metric)
 6mm through 19mm  10mm through 24mm
$34.99 $49.99

209pc Weather Pack Grease Gun Drill Adapter Kit
Connector & Seal Starter Kit  Works with all standard 14.5oz grease tubes.

 8,000 PSI MAX pressure, 4,000 PSI working.
Includes:  Includes 18” hose w/ locking coupler.
 Terminal Release Tool
 1.4, 2.5 & 2.8mm diameter silicone wire seals for 1.4-3.8mm wires #AST-ADG100 *Easily attaches to ANY drill in a
 Male 0.5-0.85mm, 1.25-2.0mm & 3mm terminal receptacles SPECIAL moment, turning it into a powerful
 Female 0.5-0.85mm, 1.25-2.0mm & 3mm terminal receptacles $99.99 grease applicator!*
 Male & Female 1, 2, 3 & 4 pole receptacle housings
 Male & Female 4 pole pin type housings
#AST-9476
SPECIAL
$69.99