Page 62 - Q3 2018 Tools News

PUNCHES, HAMMERS & PRY BARS Manufactured from machined round #OTC-7162
HAND TOOLS #IMP-05-SH4 (4 lbs) #TIT-63000 #WLS-DP112 (6" long)
BRASS DRIFT PUNCHES
HIGH-QUALITY HAMMERS
SLEDGE HAMMERS
Rolling Head Pry Bars

w/ RUBBERIZED GRIPS
WOOD HANDLE
stocks. Non-slip knurled handles on

some models. Chamfered ends.
$24.99
(3lb Sledge)
SPECIAL
SPECIAL

$16.99

$19.99
(1" x 12" drift, knurled)

#OTC-7163
$34.99

(12" long)

$26.99
FIBERGLASS HANDLES

#WLS-32

#TIT-63004
(3/4" x 9" drift, knurled)
#IMP-05-SH8F (8 lbs)

$21.99

(3lb Cross-Pein)

SPECIAL $44.99

#OTC-7164

$19.99
#IMP-05-SH12F (12 lbs)
(3/4" x 11" drift, knurled)
SPECIAL $54.99
$25.99

$29.99

#IMP-05-SH16F (16 lbs) SPECIAL #WLS-38 (16" long)

#WLS-52

#TIT-63216

SPECIAL $69.99 (2lb Brass Non-Sparking) (5/8" x 9" drift, knurled) #OTC-7165
SPECIAL $17.99 (18" long)
$34.99
$44.99 #WLS-53

4 LB. HAMMERS (5/8" x 9" drift, tapered) JIMMY BARS
$19.99
#TIT-63233
#IMP-05-CPH4 (2.5lb Stone Hammer) #WLS-58 #OTC-7166
(Cross Pein) SPECIAL (5/8” diameter, 18" long)
(5/8" x 11" drift, knurled) $24.99

#IMP-05-DH4 $19.99 $19.99
(Drilling Hammer) #OTC-7167
(3/4” diameter, 24" long)
YOUR 2pc BRASS PUNCH SET $29.99
CHOICE 5pc General Hammer Set Two large brass non-sparking punches

$16.99  (1) 16 oz. Ball Pein Hammer ideal for use near precision parts. #OTC-7168
 (1) 32 oz. Ball Pein Hammer - 8” punch (5/8” hex, tapered to 3/8”) (7/8” diameter, 30" long)
 (1) 32 oz. Rubber Mallet
- 10” straight punch (3/4” diameter)
5pc BALL PEIN HAMMER SET  (1) 3 lb Cross Pein Hammer *chamfered ends $34.99

 (1) 3 lb Sledge Hammer #OTC-4602 #OTC-7420
 Drop Forged and Heat Treated.
 Durable Fiberglass Handles. SPECIAL (7/8” diameter, 46" long)
 Includes: 8oz, 12oz, 16oz, 24oz, & 32oz. $39.99 $79.99

#IMP-04-BH5F #OTC-7421
SPECIAL (1” diameter, 54" long)
$29.99 $99.99
Parrot Bars
#TIT-63125 3pc Brass Drift Punch Set

MSRP $91.00  For non-marring and non-sparking  Indexes a full 180°
applications
SPECIAL $74.99  For aligning unhardened steel or  Head locks at 11 different angles

#TIT-17808
#TIT-17812
DEAD BLOW HAMMERS aluminum + 8” Length + 12” Length
8pc HOLLOW GASKET  Designed for use on harder surface
SPECIAL SPECIAL
#IMP-04-DBH1 PUNCH SET materials that will not be damaged by $29.99 $39.99
the softer brass punches.

(1 lb) $9.99  Punch round holes in paper, fiber,

cloth, rubber, leather and other gasket #SKT-6323
#IMP-04-DBH2 materials. MSRP $69.13
(2 lbs) $12.99  Includes: seven hole punches (1/4” - SPECIAL
5/8") and the P69 drive mandrel.
$49.99
#IMP-04-DBH3  Made from alloy steel & 3pc HANDLED PRY BAR SET

(3 lbs) $14.99 heat-treated. Made of tempered square steel that you
can hit without damaging the handle!
#VIM-P79
#IMP-04-DBH4 Set includes 8", 12", & 18" bar shank
(4 lbs) $19.99 MSRP $55.71 lengths.
SPECIAL

32pc TRANFER PUNCH SET
BRASS HAMMERS $49.99  Sizes: 3/32" - 1" in 1/64” increments,

plus a 17/32” punch.
Flame tempered hickory handles.
Non-marring, non-sparking  Made from heat treated & tempered
solid cast heads. tool steel.
 Length: 4-7/8” (.00025 diameter)
#WLS-H20  Comes in a durable pouch. #OTC-8203S
(20 oz. ballpein) MSRP $70.95
$59.99 #CEN-3S301B SPECIAL
12pc Punch & Chisel Set SPECIAL $64.99
#WLS-H56 $39.99
(3½ lb single jack)  Set includes: 4 PIECE PRY BAR SETS
$79.99 - (6) cold chisels: 1", 7/8", 13/16, 3/4",  #PB4 - features screwdriver type

5/8", 1/2"
- (4) punches: 3/8", 3/16", 1/8", 3/8" handles and has sizes 8",12",18" & 24".
- 2 center punches: 8", 5.75" 1/4" STAMP SETS  #PB40 - features heel-end pry bay
style and has sizes 6",12",16" & 20"

#AST-1612 #IMP-09-PB4
MSRP $31.18 #IMP-10-LP14 $13.99
SPECIAL
(27 piece letter)
AUTOMATIC CENTER PUNCH $19.99
$19.99
Overall Length 5 inches.
#IMP-10-NP14 #IMP-09-PB40
#IMP-10-ACP (9 piece number) $16.99
$4.99 $7.99