Page 284 - Catalogue 2015

2-Propanol

Synonym: Isopropyl alcohol, Isopropanol, sec-Propyl alcohol, IPA

CAS [67-63-0]; EC 200-661-7; CÀHÏO; M 60.1

D 0.785; m.p. -89.5 °C; b.p. 81-83 °C; UN 1219,3,II,F1

Danger H:225-319-336; P:210-241-303+361+353-305+351+338-405-501

Cat. No. 2-Propanol
162641 ULC/MS - CC/SFC

Appearance Clear colorless liquid Al (Aluminum) max. 20ppb
Ba (Barium) max. 50ppb
Color (APHA) max. 5 Bi (Bismuth) max. 50ppb
Ca (Calcium) max. 50ppb
Assay (GC, on anhydrous basis) min. 99.95% Cd (Cadmium) max. 50ppb
Co (Cobalt) max. 20ppb
Residue after evaporation max. 0.0001%w/w Cr (Chromium) max. 20ppb
Fe (Iron) max. 20ppb
Water (KF) max. 0.05%w/w K (Potassium) max. 50ppb
Li (Lithium) max. 50ppb
Acidity (as Acetic acid) max. 0.001% Mg (Magnesium) max. 20ppb
Mn (Manganese) max. 20ppb
Alkalinity (as Ammonia) max. 0.0001% Mo (Molybdenum) max. 50ppb
Na (Sodium) max. 50ppb
MS-ESI+ (as Reserpine) max. 20ppb Ni (Nickel) max. 20ppb
Pb (lead) max. 20ppb
H.Peak by PDAD 235-400nm max. 0.002AU Sn (Tin) max. 50ppb
Sr (Strontium) max. 50ppb
Grad. elution H.Peak at 235nm max. 0.001AU Zn (Zinc) max. 50ppb

Grad. elution drift at 235nm max. 0.010AU max. 0.1ppm
max. 0.05ppm
Grad. elution H.Peak at 254nm max. 0.001AU max. 0.05ppm
max. 0.05ppm
Grad. elution drift at 254nm max. 0.005AU max. 0.02ppm
max. 0.02ppm
F254nm (as Quinine) max. 0.5ppb max. 0.02ppm
max. 0.05ppm
F365nm (as Quinine) max. 0.5ppb max. 0.1ppm
max. 0.05ppm
T220nm min. 80% max. 0.02ppm
max. 0.05ppm
T230nm min. 90% max. 0.05ppm
max. 0.02ppm
T250nm min. 99% max. 0.02ppm
max. 0.05ppm
Ag (Silver) max. 50ppb max. 0.05ppm
max. 0.1ppm
Filtered through 0.1µm, filled under inert gas.

Cat. No. 2-Propanol
162678 LC-MS

Appearance Clear colorless liquid Bi (Bismuth)
Acidity (as Acetic acid) max. 0.002% Ca (Calcium)
Alkalinity (as Ammonia) max. 0.0005% Cd (Cadmium)
Color (APHA) max. 5 Co (Cobalt)
Assay (GC, on anhydrous basis) min. 99.95% Cr (Chromium)
LC-MS suitability test Complies Cu (Copper)
Water (KF) max. 0.05%w/w Fe (Iron)
T210nm min. 40% K (Potassium)
T220nm min. 80% Li (Lithium)
T230nm min. 90% Mg (Magnesium)
T250nm min. 98% Mn (Manganese)
Grad. elution H.Peak at 235nm max. 0.001AU Mo (Molybdenum)
Grad. elution H.Peak at 254nm max. 0.002AU Na (Sodium)
Residue after evaporation max. 0.0005%w/w Ni (Nickel)
Ag (Silver) max. 0.1ppm Pb (Lead)
Al (Aluminum) max. 0.05ppm Sn (Tin)
Ba (Barium) max. 0.1ppm Sr (Strontium)
Zn (Zinc)

Filtered through 0.2µm, filled under inert gas.