Page 351 - US ACCESSORIES GUIDE (2019)

SHOP PRODUCTS FOR ENGINE ASSEMBLY AND MAINTENANCE

LOCTITE® 518™ GASKET ELIMINATOR® FLANGE LOCTITE 5900 BLACK RTV SILICONE SEALANT
SEALANT

92-809826
92- 12564 2 Slightly heavier body than 587 Blue, which helps resist blowout during assembly.
Forms a flexible, solvent‑resistant seal that will not tear or decay. Seals to 300 F Makes reliable form‑in‑place gaskets. Temp. range is 75 deg.F (24 deg.C) to 625
(149 C) and fills gaps to .05 in (1.27mm). Can be used on flexible metal deg.F (329 deg.C)
assemblies, including aluminum surfaces. Easy disassembly for cleaning. Ideal for 371 g (13 oz) tube
on‑the‑spot and emergency repairs or when a conventional gasket is out of stock.
Gaskets and sealing: Suited best for small gap applications and rigid LOCTITE FORM-A-GASKET SEALANT #2
metal‑to‑metal assemblies
25 ml (0.8 oz) cartridge
LOCTITE 587 ULTRA BLUE RTV SILICONE SEALANT

92-809834
Slow drying, non‑hardening sealant designed for sealing cut gaskets and stamped
parts. Allows for easy disassembly if required. Temperature range ‑65 deg. F to
400 deg. F; resists common shop fluids and fuels.
92-809825 85 g (3 oz) tube
Low odor, non‑corrosive, low volatility sealant and high temperature gasket
compound. Makes reliable form‑in‑place gaskets. Temp. range is 75 deg.F (24 LOCTITE READY GASKET
deg.C) to 500 deg.F (260 deg.C)
85 g (3 oz) tube
LOCTITE 587 BLUE HIGH PERFORMANCE RTV
SILICONE

92-898101388
Makes high‑performance, leak‑proof gaskets in one minute equipment can be
returned to service immediately. Elastomeric rubber gasket technology
blowout‑resistant and sensor‑safe. Outperforms pre‑cut gaskets. Resists ATF,
coolant, oil, and other shop fluids. Protects against leaks caused by vibration and
92-809825001 thermal expansion. Temperature range: 75 to 450 degrees F (60 to 232 degrees
A high‑performance, RTV silicone developed to meet today's technology. C) continuous, 500 degrees F (260 degrees C) intermittent. New Power Can
dispenser provides: More accurate dispensing of constant, steady silicone beads.
Outstanding oil resistance use where superior performance and oil resistance is Ergonomic and easy to use fingertip trigger. Silicone product and dispense system
required. Non‑corrosive and low odor. and meets automotive volatility in one, eliminating the need for a caulking gun. Attached nozzles ‑ no more
specifications. Temperature range is 75 to 500 degrees F (‑59‑ to 260‑degree C). searching for displaced nozzles. Non flammable products. Propellants used are
SHOP PRODUCTS FOR ENGINE ASSEMBLY AND MAINTENANCE 190 ml (6.42 fl oz) can Place Orders | Print Invoices | Register Product | Pay Online
New Power Can dispenser provides: More accurate dispensing of constant, steady
VOC free.
silicone beads. Ergonomic and easy to use fingertip trigger. Silicone product and
190 ml (6.42 fl oz) can
dispense system in one, eliminating the need for a caulking gun. Attached nozzles
‑ no more searching for displaced nozzles. Non flammable products. Propellants
used are VOC free.

338