Page 48 - US ACCESSORIES GUIDE (2019)

OUTBOARD

TRAILERING TILT LOCK KIT
BATTERY CABLE KIT
Longer than standard, consists of two, 12 ft. (3.66 m) battery cables.

BATTERY CABLE KIT OUTBOARD

819504A 2
Positions engine at half tilt for trailering.
Fits Force 90‑150 hp. 2 cycle models with or without power trim, 1994 and prior
(0E093699 and prior).
TILT SUPPORT BRACKET KIT 84- 88439A50
Pair of 12 ft.(3.7 m) cables, 1 red (+) Positive and 1 black ( ‑) Negative, 4 gauge
with ring terminals. This is an optional accessory kit and may not reflect the original
cables on your engine. For original manufactured service part replacement, the
Electronic Parts Catalog should always be used for each specific engine. For
alternate length cables, consult the approriate service manual.
Fits Mercury/Mariner outboard engines.
BATTERY CABLE-POS

8M0072610
This shorter bracket will support the engine in a reduced trim up position when tilt is
limited. Prevents engine from trim bleed down. Recommended for use with the trim
limit control 8M0059532.
Fits the F150 EFI FourStroke outboard, serial number 1B905505 and above.
TRAILERING CLIP
84- 88439A25
TRAILERING CLIP Single 12 ft. positive cable. 4 Gauge with ring terminals.
BATTERY CABLE-NEG

833006A 1
Clips over center trim ram in extended position. Locks motor in a tilted position.
Fits Mercury/Mariner V‑6 engines with Design II (3 ram) power trim systems and
the 135/150/175 hp. Verado outboard.
84- 88439A26
Single 12 ft. negative cable. 4 Gague with ring terminals
BATTERY CABLE KIT

84-8M0133542
2 cables in the kit (one red, one black),12 feet long, 2 AWG, 5/16" ring terminal
engine side and 3/8" ring terminal battery side
When the application demands 2 gauge wire size.
POSITIVE BATTERY CABLE

84-8M0136941
1 cable in the kit (red),12 feet long, 2 AWG, 5/16" ring terminal engine side
and 3/8" ring terminal battery side
When the application demands 2AWG wire size

2019 US Accessories Guide 35