Page 88 - US ACCESSORIES GUIDE (2019)

OUTBOARD

4 FT. FUEL LINE ASSEMBLY - NO CONNECTORS PRIMER BULB ASSEMBLY OUTBOARD

32-8M0061812 8M0061876
Low permeation hose 4 ft. (1.22 m)line with no connector on one end and an Using materials resistant to the chemistry of today's fuels, this bulb is designed to
"EPA‑MERC‑PB15" primer bulb on the other end. Bulb will perform at ‑15 Degrees remain pliable longer. Two hose clamps are included. Only Mercury/Quicksilver
C (5 Degrees F) after 6 weeks of exposure to fuel. bulbs will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs
Standard universal 5/16 inch (8 mm) I.D. fuel line will adapt to a variety of will perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
EPA‑2011 uses by hard plumbing or adding connectors as desired. This bulb is a 2011 EPA Certified low permeation bulb. For use with our gray color,
5/16 in. (8 mm) I.D. fuel line & 3/8" I.D. fuel line.
BULK FUEL LINE Priced individually, sold @ multiples of 4
Mercury Branded, Box Point of Sale Packaged.
8M0061875
Using materials resistant to the chemistry of today's fuels, this bulb is designed to
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
This bulb is a 2011 EPA Certified low permeation bulb. For use with our gray color,
5/16 in. (8 mm) I.D. fuel line & 3/8" I.D. fuel line.
Priced individually, sold @ multiples of 4
Quicksilver Branded, Box Point of Sale Packaged.
32-8M0038500 FUEL LINE FITTINGS AND COMPONENTS
Low Permeation hose, 5/16 in. (8 mm) I.D. x 100 ft. (30.5 m) spool. (EPA
compliant). THREADED HOSE BARB
Fits fuel line assemblies for delivering fuel from the fuel tank to the engine fuel
connector.
32-8M0038563
Low Permeation hose, 3/8 inch (9.5 mm) I.D. x 100 ft. (30.5 m) roll.
EPA Compliant.
PRIMER BULB ASSEMBLY

22-8M0086290
For use with 3/8" (9.5 mm) I.D. hose and applications requiring a 1/2" NPT thread.
Threads into our portable fuel tanks and will also work with our water separating
filter bracket.
A brass fitting for use with both gasoline fuel only. This material should not be used
with diesel fuels.
8M0052976
Using materials resistant to the chemistry of today's fuels, this bulb is designed to
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
This bulb is a 2011 EPA Certified low permeation bulb. For use with 1/4 in. (6.35
mm) I.D. fuel line.
Priced individually, sold @ multiples of 4
Mercury Branded, Box Point of Sale Packaged.
8M0052975
Using materials resistant to the chemistry of today's fuels, this bulb is designed to
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
This bulb is a 2011 EPA Certified low permeation bulb. For use with 1/4 in. (6.35
mm) I.D. fuel line.
Priced individually, sold @ multiples of 4
Quicksilver Branded, Box Point of Sale Packaged.

2019 US Accessories Guide 75