Page 97 - US ACCESSORIES GUIDE (2019)

OUTBOARD

WATER SEPARATING FUEL FILTER KIT WATER SEPARATING FUEL FILTER KIT

OUTBOARD

8M0109543 35-8M0114618
A vessel mounted water separating fuel filter featuring a see‑through bowl This vessel mounted kit (with higher capacity) replaces the engine on‑board water
for visual inspection and a drain for servicing. A water in fuel sensor will separating fuel filter. It features the use of a see‑through plastic bowl for visual
provide an alert compatible with Mercury controls and instrumentation. inspection and a drain for servicing. This kit may be used as optional to the
Hose fittings are included for 3/8 inch (9.5 mm) I.D. fuel lines and 2 adjustable hose standard kit now shipped with Gen 5, FSM equipped 6‑cylinder Verados. For use
clamps. For use with vented fuel tanks only. with vented fuel tanks only.
Fits the Mercury/Mariner F150 Hp. EFI FourStroke 4‑cylinder outboard, the Fits the 6‑cylinder Gen IV and newer Verado outboard and must be installed in a
F75‑115 Hp. FourStroke (s/n 2B094996 and above) and must be installed in a compartment open to the atmosphere or void of ignition sources.
compartment open to the atmosphere or void of ignition sources.
QUICKSILVER WATER SEPARATING FUEL FILTER
QUICKSILVER WATER SEPARATING FUEL FILTER

35-8M0103096
35-8M0103095 Outboard Element without Plastic Bowl, spins on to existing Quicksilver filter heads
Outboard Element without Plastic Bowl, spins on to existing Quicksilver filter heads with 1‑14 threads.
with 11/16‑16 threads. For outboards, allows for filter replacement when re‑using the see‑through plastic
For outboards, allows for filter replacement when re‑using the see‑through plastic bowl. Degree of filtration is 10 micron.
bowl. Degree of filtration is 10 micron. Quicksilver Branded
Quicksilver Branded
WIF SENSOR EXTENSION HARNESS
WATER SEPARATING FUEL FILTER KIT

84-8M0105263
35-8M0113498 Helps detect water in fuel.
This vessel mounted kit (with higher capacity) replaces the engine on‑board water Provides a 36 inch (914 mm) extension for the vessel mounted water separating
separating fuel filter. It features the use of a see‑through plastic bowl for visual fuel filters that are equipped with a WIF (water in fuel) sensor.
inspection and a drain for servicing. For use with vented fuel tanks only.
Fits the 135‑200 Hp. 4‑cylinder Verado outboard and must be installed in a 84-8M0105264
compartment open to the atmosphere or void of ignition sources. Helps detect water in fuel.
Provides a 6 foot (1.8 m) extension for the vessel mounted water separating fuel
filters that are equipped with a WIF (water in fuel) sensor.

84 Place Orders | Print Invoices | Register Product | Pay Online