Page 96 - Latin America Accessories Guide (2020) - 8M0163252

OUTBOARD

WATER SEPARATING FUEL FILTER QUICKSILVER WATER SEPARATING FUEL FILTER OUTBOARD

35-8M0095658 35-8M0146203
Designed smaller to better fit the hand, the internal holding capacity of this filter is Outboard Element without Plastic Bowl, spins on to existing Quicksilver filter heads
as great as our standard filter. A new o‑ring for the water sensor is included with with 11/16‑16 threads. "NEW PRICE for 2019"
each filter. For outboards, allows for filter replacement when re‑using the see‑through plastic
This replacement filter fits the vessel mounted filter kit furnished standard with all bowl. Degree of filtration is 10 micron.
FSM equipped 6‑cylinder Verado outboards, Gen 5 (s/n 2B144123 and above). Quicksilver Branded
Quicksilver Branded
WATER SEPARATING FUEL FILTER KIT
WATER SEPARATING FUEL FILTER KIT

35-8M0113498
98-8M0103686 This vessel mounted kit (with higher capacity) replaces the engine on‑board water
An option to the standard provided, vessel mounted water separating filter kit. separating fuel filter. It features the use of a see‑through plastic bowl for visual
Contains filter, bracket hose and harness to install a water separating filter under inspection and a drain for servicing. For use with vented fuel tanks only.
the cowl of a 6‑cylinder, Gen 5, FSM equipped Verado outboard. Fits the 135‑200 Hp. 4‑cylinder Verado outboard and must be installed in a
Fits the Gen 5, 6‑cylinder Verado outboard (s/n 2B144123 and above). compartment open to the atmosphere or void of ignition sources.
WATER SEPARATING FUEL FILTER KIT WATER SEPARATING FUEL FILTER KIT

8M0109543 35-8M0114618
A vessel mounted water separating fuel filter featuring a see‑through bowl for This vessel mounted kit (with higher capacity) replaces the engine on‑board water
visual inspection and a drain for servicing. A water in fuel sensor will provide an separating fuel filter. It features the use of a see‑through plastic bowl for visual
alert compatible with Mercury controls and instrumentation. Hose fittings are inspection and a drain for servicing. This kit may be used as optional to the
included for 3/8 inch (9.5 mm) I.D. fuel lines and 2 adjustable hose clamps. For use standard kit now shipped with Gen 5, FSM equipped 6‑cylinder Verados. For use
with vented fuel tanks only. with vented fuel tanks only.
Fits the Mercury/Mariner F150 Hp. EFI FourStroke 4‑cylinder outboard, the Fits the 6‑cylinder Gen IV and newer Verado outboard and must be installed in a
F75‑115 Hp. FourStroke (s/n 2B094996 and above) and must be installed in a compartment open to the atmosphere or void of ignition sources.
compartment open to the atmosphere or void of ignition sources.

2020 Mercury Precision Parts & Accessories Guide 87