Page 20 - 2021FallandWinterizingGuide

NEW! Water Separating
SHOPPING LIST:
SHOPPING LIST:
2021 FALL MERCURY ENGINE PARTS - MERCURY
2017 FALL P&A-MERCURY
N OW AVA I L A B LE

Fuel Filter Kit

The NEW Water Separating Fuel Filter from
Mercury Precision Parts delivers maximum
Water Separating FF
®
protection of marine gas-engine components
by effectively removing contaminants from fuel,
such as water, silica, sand, dirt, and rust.
Perfect for Verado outboards 250hp and higher and other
marine engines using boat-mounted fuel filters, especially
offshore boats with boat-mounted fuel filters. Fuel Filter Kit Filter Mount
comes standard with Verado 350hp and 400hp outboards.

Fuel Filter
Industry Leading Protection
• ONLY Fuel Filter Kit that meets U.S. Coast Guard and
American Boat and Yacht Council (ABYC H-24) fuel-system
requirements (must purchase complete Fuel Filter Kit). Filter Sensor
• Designed to meet 33 CFR 183.590 or ISO 10088 fire test. Hardware

• NEW Water Separating and Sensing Fuel Filter Kit is the
ONLY Coast Guard approved solution for applications
that have an inboard engine or generator installed on the
vessel as ABYC H-24 requirements.
Wire Harness
• Water-in-fuel sensor assembly fits existing Mercury
electrical harness.
Filter meets 33 CFR USCG part 183.534, ABYC H-24 Appendix A
and ISO 10088 fire-resistant specifications ONLY when used with
fire-rated filter head and water-in-fuel sensor.
Made for Marine
• Filter separates water from fuel as it removes other impurities. Description Part No.
Fuel contaminated with water can result in poor engine
performance, stalling and damage to fuel-system components. Water Separating Fuel Filter 8M0157616
• Unique filtration system screens particles as small as Water Separating Fuel Filter Kit 8M0157707
10-micron to keep fuel systems clean.
NEW fuel filter replaces fuel filter 8M0095659, (Fuel Filter Kit)
• Mercury filters feature a metal shell that is 50% thicker than NEW water-in-fuel sensor, fuel filter wire
conventional filter shells and boasts a durable powder-coat harness, o-ring, filter head base assembly, 8M0157779
paint finish to resist corrosion – even in saltwater environments. pipe plug, instruction sheet, miscellaneous parts (Water-in-fuel Sensor)
• Epoxy-coated internal surfaces resist rust caused by exposure
to water captured within filter.
• Removes water and other impurities from gasoline for optimum
fuel-system performance.

© 2020 Mercury Marine. All Right Reserved. Reproduction
in whole or in part without permission is prohibited.
20