Page 108 - US ACCESSORIES GUIDE (2019)

OUTBOARD

FILL CAP O-RING BULK OIL FILL HOSE OUTBOARD

25- 11332 2C12 3.54 32-850719 442A40 632.00
Replacement O‑Ring for Fill Cap Helical corrugated cover, helical non‑metallic reinforcement, smooth wall PVC. 1
2.225 x .210 1/2 " (38 mm) x 100 ft. (30 m)
For use with a deck oil fill kit and the 1.8 US gal (6.8 L) or 3 US gal (11 L) remote
DECK FILL KIT - OIL (STRAIGHT ELBOW) oil tank reservoirs. This kit must NOT be used with Auto Blend.
FRONT LOW WATER PICK-UP PLUG KIT

Used in special applications where debris is plugging the low water
pick‑ups in the nose of the gearcase. This will also limit the amount of
cooling water flow. Do not use this kit if the side water pick‑ups are out
of the water when the boat is on plain.

WATER INLET PLUG KIT

15969A13 47C50 79.17 895764A01 63C95 106.58
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Contains two plugs, o‑ring and shift shaft gasket.
Comes with deck fittings, filler cap and mounting hardware. Oil fill hose must be Plugs the front low water pick‑up on the gearcase for the 3.0L EFI/Optimax
ordered separately to complete the assembly. outboards with the shift shaft bushing assembly that is fastened with 2 screws.
For use with 1.8 US gal (6.8 L) or 3 US gal (11 L) remote oil tank reservoirs. This
kit must NOT be used with Auto Blend. WATER INLET PLUG KIT
DECK FILL KIT - OIL (80 DEGREE ELBOW)

8M0052921 57C75 96.25
Contains plugs and gasket to seal the low water pickups from injesting debris into
15969A11 50C65 84.42 the engine water cooling passages.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Fits the Verado gearcase and the Torquemaster II with the shift shaft bushing
Comes with deck fittings, filler cap and mounting hardware. Oil fill hose must be fastened with 4 screws.
ordered separately to complete the assembly.
For use with 1.8 US gal (6.8 L) or 3 US gal (11 L) remote oil tank reservoirs. This
kit must NOT be used with Auto Blend.

2019 US Accessories Guide 95