Page 356 - US ACCESSORIES GUIDE (2019)

SHOP PRODUCTS FOR ENGINE ASSEMBLY AND MAINTENANCE

LOCTITE® 518™ GASKET ELIMINATOR® FLANGE LOCTITE 5900 BLACK RTV SILICONE SEALANT
SEALANT

92-809826 24C61 41.02
92- 12564 2 24C69 41.15 Slightly heavier body than 587 Blue, which helps resist blowout during assembly.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Makes reliable form‑in‑place gaskets. Temp. range is 75 deg.F (24 deg.C) to 625
Forms a flexible, solvent‑resistant seal that will not tear or decay. Seals to 300 F deg.F (329 deg.C)
(149 C) and fills gaps to .05 in (1.27mm). Can be used on flexible metal 371 g (13 oz) tube
assemblies, including aluminum surfaces. Easy disassembly for cleaning. Ideal for
on‑the‑spot and emergency repairs or when a conventional gasket is out of stock. LOCTITE FORM-A-GASKET SEALANT #2
Gaskets and sealing: Suited best for small gap applications and rigid
metal‑to‑metal assemblies
25 ml (0.8 oz) cartridge
LOCTITE 587 ULTRA BLUE RTV SILICONE SEALANT

92-809834 3C95 6.58
Slow drying, non‑hardening sealant designed for sealing cut gaskets and stamped
parts. Allows for easy disassembly if required. Temperature range ‑65 deg. F to
400 deg. F; resists common shop fluids and fuels.
85 g (3 oz) tube
92-809825 8C99 14.98
Low odor, non‑corrosive, low volatility sealant and high temperature gasket LOCTITE READY GASKET
compound. Makes reliable form‑in‑place gaskets. Temp. range is 75 deg.F (24
deg.C) to 500 deg.F (260 deg.C)
85 g (3 oz) tube
LOCTITE 587 BLUE HIGH PERFORMANCE RTV
SILICONE

92-898101388 14C29 23.81
Makes high‑performance, leak‑proof gaskets in one minute equipment can be
returned to service immediately. Elastomeric rubber gasket technology
blowout‑resistant and sensor‑safe. Outperforms pre‑cut gaskets. Resists ATF,
coolant, oil, and other shop fluids. Protects against leaks caused by vibration and
thermal expansion. Temperature range: 75 to 450 degrees F (60 to 232 degrees
C) continuous, 500 degrees F (260 degrees C) intermittent. New Power Can
92-809825001 12C23 20.38 dispenser provides: More accurate dispensing of constant, steady silicone beads.
A high‑performance, RTV silicone developed to meet today's technology. Ergonomic and easy to use fingertip trigger. Silicone product and dispense system
Outstanding oil resistance use where superior performance and oil resistance is in one, eliminating the need for a caulking gun. Attached nozzles ‑ no more
required. Non‑corrosive and low odor. and meets automotive volatility searching for displaced nozzles. Non flammable products. Propellants used are
specifications. Temperature range is 75 to 500 degrees F (‑59‑ to 260‑degree C). VOC free.
New Power Can dispenser provides: More accurate dispensing of constant, steady 190 ml (6.42 fl oz) can
silicone beads. Ergonomic and easy to use fingertip trigger. Silicone product and
dispense system in one, eliminating the need for a caulking gun. Attached nozzles
‑ no more searching for displaced nozzles. Non flammable products. Propellants
used are VOC free.
190 ml (6.42 fl oz) can MAINTENANCE SHOP PRODUCTS FOR ENGINE ASSEMBLY AND

2019 US Accessories Guide 343