Page 99 - US ACCESSORIES GUIDE (2019)

OUTBOARD

WATER SEPARATING FUEL FILTER KIT WIF SENSOR EXTENSION HARNESS

OUTBOARD

35-8M0113498 250A00 357.14 84-8M0105263 5C25 8.75
WARNING: Cancer - www.P65Warnings.ca.gov WARNING: Cancer - www.P65Warnings.ca.gov
This vessel mounted kit (with higher capacity) replaces the engine on‑board water Helps detect water in fuel.
separating fuel filter. It features the use of a see‑through plastic bowl for visual Provides a 36 inch (914 mm) extension for the vessel mounted water separating
inspection and a drain for servicing. For use with vented fuel tanks only. fuel filters that are equipped with a WIF (water in fuel) sensor.
Fits the 135‑200 Hp. 4‑cylinder Verado outboard and must be installed in a 84-8M0105264 6D80 13.60
compartment open to the atmosphere or void of ignition sources.
WARNING: Cancer - www.P65Warnings.ca.gov
WATER SEPARATING FUEL FILTER KIT Helps detect water in fuel.
Provides a 6 foot (1.8 m) extension for the vessel mounted water separating fuel
filters that are equipped with a WIF (water in fuel) sensor.
QUICKSILVER WATER SEPARATING FUEL FILTER

35-8M0114618 250A00 357.14
WARNING: Cancer - www.P65Warnings.ca.gov
This vessel mounted kit (with higher capacity) replaces the engine on‑board water
separating fuel filter. It features the use of a see‑through plastic bowl for visual
inspection and a drain for servicing. This kit may be used as optional to the 35-8M0116793 49C50 82.50
standard kit now shipped with Gen 5, FSM equipped 6‑cylinder Verados. For use Replaces element with plastic bowl and spins on existing Quicksilver filter heads.
with vented fuel tanks only. For outboards, has a see‑through plastic bowl allowing for visual inspection. Check
Fits the 6‑cylinder Gen IV and newer Verado outboard and must be installed in a for adequate clearance prior to mounting. Degree of filtration is 10 micron.
compartment open to the atmosphere or void of ignition sources. Quicksilver Branded
QUICKSILVER WATER SEPARATING FUEL FILTER WATER SEPARATING FUEL FILTER KIT

35-8M0103096 28D60 57.20 8M0097838 139C85 233.08
Outboard Element without Plastic Bowl, spins on to existing Quicksilver filter heads Filter Kit, consisting of filter canister featuring sight bowl and manual drain and
with 1‑14 threads. including our filter bracket with fittings. No water in fuel sensor is included or used
For outboards, allows for filter replacement when re‑using the see‑through plastic with this kit. For use with vented fuel tanks only.
bowl. Degree of filtration is 10 micron. Vessel mounted in a ventilated location open to the atmosphere or void of ignition
Quicksilver Branded sources, this kit is intended for use with Mercury, Mariner or Force gasoline
outboard engines that do not already have a water separating fuel filter. This kit is
included standard with the F75‑150 FourStroke SeaPro outboards beginning in
2014.

86 Place Orders | Print Invoices | Register Product | Pay Online