Page 129 - Mercury Service Tool Guide (2021) - 8M0174458

FOURSTROKE MODELS

PIN STOP INSTALL TOOL BEARING DRIVER TOOL
FOURSTROKE MODELS Part of tool assembly P/N 8M0057704. Removes pinion bearing from gear housing.

91-8M0062360
91-8M0045644
Aids in the installation of the shift actuator rod.
SHIMMING PLATE
ACTUATOR ASSEMBLY TOOL

91-889586
91-8M0045645 Fixture used to shim the forward gear. (Stamped 06701)
Part of tool assembly P/N 8M0057704.
Aids in the installation of the shift actuator rod. DRIVESHAFT HOLDING TOOL
ACTUATOR ASSEMBLY TOOL

91-8M0057704
Aids in the installation of the shift actuator rod.
PINION HEIGHT TOOL KIT

91-889958T
Holds driveshaft during pinion nut removal.
91-8M0089163 Used on Verado models.
Measures pinion gear height.
PINION BEARING TOOL
PINION HEIGHT TOOL UPGRADE KIT

91-8M0089165
Upgrades previous pinion gear locating tool kit P/N 8M0057712 to current
P/N 8M0089163 components.
BEARING CUP/ADAPTER INSTALL TOOL

91-895195
Guides the removal and installation of the pinion bearing.
91-8M0057767
Installs the forward gear bearing race on the standard right‑hand gear case. BEARING INSTALLATION TOOL
Presses the reverse gear bearing adapter into the gear housing on the counter
left‑hand gear case.
BEARING CUP/ADAPTER TOOL UPGRADE KIT

91-8M0057768
Install in place of the manual release valve to measure the down pressure in the
power trim system.
91-895195T01
Aids in the installation of bearings into the gearcase.

122 Place Orders | Print Invoices | Register Product | Pay Online