Page 208 - Mercury Service Tool Guide (2020) - 8M0163249

ADHESIVES

ADHESIVES

LOCTITE 271- HIGH STRENGTH THREAD LOCKER LOCTITE® 222MS® THREADLOCKER

92-809819 92-809818
Used in extreme duty applications where permanent lock is critical. Ideal for fastener diameters of 1/4 in. (6mm) and smaller, long engagement length
10 ml (.34 fl oz) plastic bottle fasteners and components requiring occasional adjustment.
Threadlocking: Best suited for metals that rust and the parts are not
LOCTITE® 518™ GASKET ELIMINATOR® FLANGE pre‑assembled.
SEALANT Low strength formula for easy removal.
10 ml (.3 oz) plastic bottle
LOCTITE 242 - MEDIUM STRENGTH THREAD LOCKER ADHESIVES

92- 12564 2
Forms a flexible, solvent‑resistant seal that will not tear or decay. Seals to 300 F
(149 C) and fills gaps to .05 in (1.27mm). Can be used on flexible metal
assemblies, including aluminum surfaces. Easy disassembly for cleaning. Ideal for 92-809821
on‑the‑spot and emergency repairs or when a conventional gasket is out of stock. Medium strength for general purpose. Ideal for all nut and bolt combinations. Used
Gaskets and sealing: Suited best for small gap applications and rigid where future disassembly or adjustment is possible.
metal‑to‑metal assemblies 10 ml (.34 fl oz) plastic bottle
25 ml (0.8 oz) cartridge
LOCTITE PRIMER N
LOCTITE 680 RETAINING COMPOUND

92-809824
92-809833 Excellent general purpose surface preparation and curing catalyst. Reduces fixture
Retains gears, pulleys, flywheels, rotors and shafts. Excellent for replacement of time for most sealants to 5 to 30 minutes; full cure is 24 hours. Used with locking,
bearings in worn housings or keys in worn keyways. retaining, pipe and gasketing compounds.
10 ml (.34 fl oz) plastic bottle 129 g (4.5 oz) spray can

Mercury Service Tool Guide 201