Page 130 - Toro Irrigation Product Catalogue August 2020
P. 130
Aqua-Traxx Flow Control (FC) Premium Drip Tape
Aqua-Traxx Flow Control (FC) Premium Drip Tape cont.
®
®
– with the PBX advantage cont.
Flow Control - Flow Rates Flow Control - Wall Thickness
™
™
Outlet Emitter Flow Rate Final Operating Pressure
Emitter Flow Spacing Emitter Requirement Wall Length Weight
kPa
FLOWCONTROL FLOW RATES Exponent Diameter FLOWCONTROL WALL THICKNESS
bar
™
™
Thickness
Part Number
cm Lph Lph/1 m Mesh Micron Min Min m Kg
Max †
Outlet Spacing @ 70 kPa Filtration Requirement Max † Operating Pressure
@ 70 kPa Emitter Flow Rate
Emitter Flow Emitter Wall Length Weight
8 mil
28
0.20 gph emitter cm lph lph/1 metre Exponent mesh micron Diameter Thickness 110 kPa 0.3 1.1 bar 2,286 30
Part Number
5/8”
@ 70 kPa
@ 70 kPa
min
min
max
max
AAFCXxx0667 15 0.76 4.99 (16mm) 10 mil 28 172 0.3 † 1.7 1,829 metres 29 kg
†
0.20 gph emitter
28
29
AAFCXxx0850 20 15 0.76 0.76 3.74 4.99 0.635” 12 mil 8 mil 172 0.3 1.7 1,554 2,286 30
AAFCXxx0667
110
1.1
28
0.3
5/8”
28
AAFCXxx1234 30 20 0.76 0.76 2.50 3.74 0.3 150 98 (16mm) 10 mil 172 0.3 1.7 1,219 1,829 29 29
15 mil
AAFCXxx0850
172
0.3
28
1.7
AAFCXxx1234
AAFCXxx1625 40 30 0.76 0.76 1.87 2.50 0.3 150 98 0.635” 12 mil 28 172 0.3 1.7 1,554 29
0.76
1.87
40
AAFCXxx1625
AAFCXxx1822 45 45 0.76 0.76 1.67 1.67 15 mil 28 172 0.3 1.7 1,219 29
AAFCXxx1822
8 mil
1,829
0.3
33
28
1.0
103
AAFCXxx2417 60 60 0.76 0.76 1.25 1.25 7/8” 10 mil 28 138 0.3 1.4 1,341 32
AAFCXxx2417
0.27 gph emitter (22mm) 12 mil 28 138 0.3 1.4 1,219 33
0.880”
AAFCXxx0690 15 1.01 6.66 “X denotes the diameter - 5 for 5/8” and 7 for 7/8”. 1.5 914 30
28
152
0.3
15 mil
AAFCXxx0867 20 1.01 4.99 “xx denotes mil (1/1000th of an inch) thickness.
AAFCXxx1245 30 1.01 3.33 0.3 150 Metric outlet spacing expressed in nominal length.
98
“X denotes the diameter - 5 for 5/8” and 7 for 7/8”.
AAFCXxx1634 40 1.01 2.50 “xx denotes mil (1/1000th of an inch) thickness.
AAFCXxx1830 45 1.01 2.22 † Coefficient of Variation (CV) less than 3%.
Metric outlet spacing expressed in nominal length.
AAFCXxx2422 60 1.01 1.67
† Coefficient of Variation (CV) less than 3%.
↑ Maximum pressure within laterals while operating or flushing.
Not all configurations are available in all regions
↑ Maximum pressure within laterals while operating or flushing.
Not all configurations are available in all regions
EMITTER FLOW vs PRESSURE
2.0
1.75
1.50
1.25
FLOW RATE (lph) 1.00
0.75
0.50 1.01 lph @ 70 kPa
0.76 lph @ 70 kPa
0.25
0.00
25 50 75 100 125 150 175
Pressure (kPa)
FLOWCONTROL CODE BUILDER
Aqua-Traxx ®
Aqua-Traxx® with the Tube Diameter Wall Thickness Emitter Spacing Flow Rate Roll Length
Flow Control
PBX Advantage (5/8”-16mm) (10 mil) (08”- 20 cm) (0.67 gpm per 100’) (600 ft x 10’ = 6000’)
Company policy is one of constant improvement and therefore changes in specifications may
120 be made without notice and without incurring liability. Please refer to www.toro.com.au
Company policy is one of constant improvement and therefore changes in specifications may
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
be made without notice and without incurring liability. Please refer to www.toro.com.au
120 Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443

