Page 20 - 2018-Master-Product-Catalog

Thread Compounds Introduction

Permatex Threadlocker adhesives are widely accepted in a broad range of applications, from delicate
®
fuel injection components to heavy duty transmission and engine assemblies. Specified by automotive
OEMs and approved for use on factory assembly lines, threadlockers apply as liquids or gels, filling
the space between threaded metal parts, and cure to form a tough, adhesive bond and seal.
Permatex Threadlockers are superior to conventional lock washers, nylon inserts, and other mechanical
®
devices because they secure the entire fastener assembly against loosening from shock and vibration, so
fastener clamping forces are maintained. Threadlockers also seal the threads against leakage, preventing rust
and corrosion. Available in a variety of strengths and temperature ratings, Permatex Threadlockers are simply
®
the most reliable way to lock and seal threaded fasteners of all shapes and sizes, either before or after assembly.

Item Torque in lbs.* Fixture** Fixture/ Temperature
Product Color Viscosity cP Fasteners Use/Common Applications
No. Break/Prevail (Full Cure) with Primer Range
Applied before assembly for throttle
Permatex 1,200/5,000 Up to 1/4” 20 min. -65° to 300°F body assembly screws, choke assembly
®
Low Strength 24024 Purple 62/27 5 min. screws, mixture adjusting screws,
Threadlocker Purple Thixotropic (6mm) (24 hrs.) (-54° to 149°C) idle control screws, relay lock screws,
body panel mounting fasteners.
19967
Applied before assembly for oil
Permatex 24206 1,200/6,000 1/4” to 3/4” 20 min. -65° to 300°F pan bolts, case cover bolts, shift
®
Medium Strength 24200 Blue 115/53 5 min. lever nuts, alternator mounts,
Threadlocker Blue 24240 Thixotropic (6-20mm) (24 hrs.) (-54° to 149°C) intake manifold, valve cover,
and disc brake caliper bolts.
24283
Applied before assembly for oil pan
®
Permatex 24027 2,250/12,000 1/4” to 3/4” 20 min. -65° to 300°F bolts, valve and cam cover bolts,
Surface Insensitive Blue 180/62 5 min. intake bolts, disc brake caliper bolts,
Threadlocker Blue 24300 Thixotropic (6-20mm) (24 hrs.) (-54° to 149°C)
alternator mounting bolts, rocker studs.
®
Permatex 1,800/5,000 3/8” to 1” 20 min. -65° to 300°F Applied before assembly of air
Permanent Strength 19962 Red 189/275 5 min. tools, cylinder block bolts, ring gear
Threadlocker Red Thixotropic (10-25mm) (24 hrs.) (-54° to 149°C) bolts, transmission shaft bolts.
Permatex Applied before assembly of air tools,
®
Permanent Strength 1,800/5,000 3/8” to 1” 20 min. -65° to 300°F cylinder block bolts, ring gear bolts,
Plug Sealant & 26240 Red 189/275 5 min.
Retaining Compound Thixotropic (10-25mm) (24 hrs.) (-54° to 149°C) transmission shaft bolts, frame
bolts, shock absorber bolts.
Threadlocker Red
19968
Permatex 27100 3/8” to 1” 20 min. -65° to 300°F Applied before assembly for threaded
®
and slip fit joints on cylinder block and
High Strength Red 500 230/225 5 min. rocker arm studs, shock absorber
Threadlocker Red 27140 (10-25mm) (24 hrs.) (-54° to 149°C) bolts, ring gear bolts, frame bolts.
27183
Applied before assembly for
Permatex 24026 3/8” to 30 min. -65° to 450°F camshaft sprocket bolts, crankshaft
®
High Temperature 27200 Red 10,000 1-1/2” 180/270 5 min. attaching bolts, idler bearings,
press fit filler tubes, transmission
Threadlocker Red (10-38mm) (24 hrs.) (-54° to 232°C)
27240 input and output shaft threads,
shock bolts, ring gear bolts.
Permatex 1” and over 60 min. -65° to 300°F Applied before assembly for frame
®
Large Diameter 27740 Red 7,000 250/200 5 min. brackets, suspension fasteners,
Threadlocker Red (25mm+) (24 hrs.) (-54° to 149°C) shock absorber mount, wheel studs.
Applied AFTER assembly
Permatex 29000 #2 to 1/2” 20 min. -65° to 300°F for carb adjustment screws,
®
Penetrating Grade Green 12 90/310 3 min. distributor bolts, preassembled
Threadlocker Green 29040 (2.2-12mm) (24 hrs.) (-54° to 149°C)
nuts and bolts, set screws.
Applied before assembly for oil pan
Permatex 24005 GEL 1/4” to 1” 15 min. -65° to 300°F bolts, case cover bolts, shift lever nuts,
®
Medium Strength Blue 115/53 5 min. alternator mounts, intake manifold,
Blue Gel 24010 Thixotropic (6-25mm) (24 hrs.) (-54° to 149°C)
valve cover and disc brake caliper bolts.
Applied before assembly for threaded
Permatex 27005 GEL 3/8” to 1” 15 min. -65° to 300°F and slip fit joints on cylinder block and
®
High Strength Red 230/225 5 min.
Red Gel 27010 Thixotropic (10-25mm) (24 hrs.) (-54° to 149°C) rocker arm studs, shock absorber
bolts, ring gear golts and frame bolts.
Thixotropic: resists dripping from threads during assembly
* 3/8”-phosphate steel **Fixture strength is equivalent to 20% of full cure strength
20 www.permatex.com 1 (877) 376-2839