Page 804 - Deko-light Catalogue 2022

Attention! Please take into account before assembly:
For an optimal and durable result, please consider the
respective climate and weather conditions before installa-
tion.
influence of solar radiation: influence of water and frost:
Please take the sun's path into account before installation. Before installation, please take into account that no stan-
Permanent and intensive sunlight can damage the LED stripe ding water can form after the profile has been built-in, e.g.
– even when it is switched off. Every material expands and in case of rain. In case of improper processing and different
contracts differently. Install the profiles taking into account temperatures, condensation can form to varying degrees or
the temperature fluctuations and the resulting expansion water can penetrate through capillary action. Standing or
coefficients. Please note that the materials aluminium, penetrating water or moisture can thus impair the tightness
PMMA, PC and Makrolon [profiles/covers] can expand to in the event of frost and damage the LED stripe. To protect
different extents with temperature changes, which can the LED stripe, we recommend half or full watering of the
affect the tightness. This is not a product defect, but a profile [depending on stress and use].
normal physical process.
Please note that we cannot accept any liability for
further processing or finishing on your part or for tight-
ness, positioning and attachment.

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

802 ALUMINIUM PROFILES | assembly notes | assembly instructions