Page 66 - Model Airplane International - Issue 175 (February 2020)

KIT BUILD

13

14

15

was brushed into the trusted method of using base coats of acrylic
exhaust to give it a (typically Tamiya Flesh XF-52 or Deck Tan
metallic sheen - Photos XF-55), then applying coats of Burnt Umber
in some of Taurus Models 8 - 12. and Burnt Sienna oil colour. Whilst preparing
superb spark plugs, wired With this item completed I the cockpit details I also painted other wooden
with fi ne lead wire supplied by moved onto the internal structure items to give them the necessary couple of
Little Cars (now modellingtools.co.uk). These which requires all manner of painted fi nishes days to dry out which included the tailskid,
very prominent features always seem to be in order to replicate wood, metal, leather grenade handles, and airscrew, the latter
inexplicably omitted by Wingnut Wings, leaving and fabric. There are some excellent decal once dried, requiring strips of masking tape
only a small hole where the plug should be. products around to create plywood effects, but so that a darker oil colour can be applied
Oil washes were used to dirty the engine, with wanting to rely upon my own painting skills later to represent the laminations. Using the
graphite from a 9B pencil, ground to a powder as much as possible I stuck to my tried and Tamiya colours dictated by the instructions

16 17 18

64 MODEL AIRPLANE INTERNATIONAL - February 2020

WOOD N WINGS 175.indd 64 08/01/2020 10:46