Page 196 - Template Tesis UTM v2.0

12. Joshi, S. V., Drzal, L. T., Mohanty, A. K., and Arora, S., “Are natural fiber

composites environmentally superior to glass fiber reinforced composites?,”
Compos. Part A Appl. Sci. Manuf., 2004. 35(3): 371–376.

13. Faruk, O., Bledzki, A. K., Fink, H. P., and Sain, M., “Biocomposites reinforced
with natural fibers: 2000–2010,” Prog. Polym. Sci., 2012. 37(11): 1552–1596.

14. Hasan, K. M. F., Islam, M., Azad, S. Al, Iqbal, M. I., and Wu, J. H., “Dynamic
mechanical behavior & analysis of the jute-glass fiber reinforced polyester

hybrid composites,” Am. J. Appl. Phys., 2016. 1(1): 1–12.

15. Sarasini, F., Tirillò, J., Valente, M., and Valente, T., “Effect of basalt fiber
hybridization on the impact behavior under low impact velocity of glass/basalt

woven fabric/epoxy resin composites,” Compos. Part A, 2013. 47(1): 109–123.
16. Hansmann, H. and Wismar, H., ASM Handbook, Volume 21. United State : ASM

International Handbook Committee, 2001.
17. Alam, A. K. M. M., Shubhra, Q. T. H., Al-Imran, G., Barai, S., Islam, M. R., and

Rahman, M. M., “Preparation and characterization of natural silk fiber-

reinforced polypropylene and synthetic E-glass fiber-reinforced polypropylene
composites: a comparative study,” J. Compos. Mater., 2011. 45(22): 2301–2308.

18. http://www.boeing.com/boeing/commercial/787family. [Accessed: 02-Nov-

2017].
19. Jawaid, M. and Abdul Khalil, H. P. S., “Cellulosic/synthetic fibre reinforced

polymer hybrid composites: A review,” Carbohydr. Polym., 2011. 86(1): 1–18.
20. Shahzad, A., “Impact and fatigue properties of hemp-glass fiber hybrid

biocomposites,” J. Reinf. Plast. Compos., 2011. 30(16): 1389–1398.
21. Jawaid, M., Abdul Khalil, H. P. S. P. S., Abu Bakar, A., Khalil, H. P. S. A., and

Bakar, A. A., “Woven hybrid composites: Tensile and flexural properties of oil

palm-woven jute fibres based epoxy composites,” Mater. Sci. Eng. A, 2011.
528(15): 5190–5195.

22. CRC for Advanced Composite Structures, “Technical article: natural fibre
composites - challenges and potential,”. United Kingdom, 2010.

23. Kwon, H. J., Sunthornvarabhas, J., Park, J. W., Lee, J. H., and Kim, H. J.,
“Tensile properties of kenaf fiber and corn husk flour reinforced poly(lactic acid)

hybrid bio-composites: Role of aspect ratio of natural fibers,” Compos. Part B

Eng., 2014. 56: 232–237.
24. Baghaei, B., Skrifvars, M., and Berglin, L., “Manufacture and characterisation

162