Page 201 - Template Tesis UTM v2.0

73. Yenilmez, B., Senan, M., and Murat Sozer, E., “Variation of part thickness and

compaction pressure in vacuum infusion process,” Compos. Sci. Technol., 2009.
69: 1710–1719.

74. Rodríguez, E., Petrucci, R., Puglia, D., Kenny, J. M., and Vázquez, A.,
“Characterization of composites based on natural and glass fibers obtained by

vacuum infusion,” J. Compos. Mater., 2005. 39(3): 265–282.
75. Summerscales, J. and Searle, T. J., “Low-pressure (vacuum infusion) techniques

for moulding large composite structures,” Proc. Inst. Mech. Eng. Part L J.

Mater. Des. Appl., 2005. United Kingdom,45–58.
76. Bender, D., Schuster, J., and Heider, D., “Flow rate control during vacuum-

assisted resin transfer molding (VARTM) processing,” Compos. Sci. Technol.,
2006. 66(13): 2265–2271.

77. Francucci, G., Manthey, N., Cardona, F., and Aravinthan, T., “Processing and
characterization of 100% hemp-based biocomposites obtained by vacuum

infusion,” J. Compos. Mater., 2013. 1–13.

78. Agirregomezkorta, A., Sanchez-Soto, M., Aretxaga, G., Sarrionandia, M., and
Aurrekoetxea, J., “Effects of vacuum infusion processing parameters on the

impact behavior of carbon fiber reinforced cyclic butylene terephthalate

composites,” J. Compos. Mater., 2013. 48(3): 333–344.
79. http://www.uesoman.com. [Accessed: 15-June-2017].

80. Petrucci, R., Santulli, C., Puglia, D., Sarasini, F., Torre, L., and Kenny, J. M.,
“Mechanical characterisation of hybrid composite laminates based on basalt

fibres in combination with flax, hemp and glass fibres manufactured by vacuum
infusion,” Mater. Des., 2013. 49: 728–735.

81. Azwan, S. M. S., Yazid, Y. M., Amran, A., and Abdi, B., “Quasi-static

indentation behaviour of glass fibre reinforced polymer,” Adv. Mater. Res.,
2014. 970: 317–319.

82. Ahmed, A., Bingjie, Z., Ikbal, M. H., Qingtao, W., Obed, A., and Wei, L.,
“Experimental study on the effects of stacking sequence on low velocity impact

and quasi-static response of foam sandwich composite structures,” Adv. Struct.
Eng., 2015. 18(11): 1789–1805.

83. Atiqah, A., Maleque, M. A., Jawaid, M., and Iqbal, M., “Development of kenaf-

glass reinforced unsaturated polyester hybrid composite for structural
applications,” Compos. Part B, 2014. 56: 68–73.

167