Page 69 - Q3 2018 Tools News

MISCELLANEOUS
COIL SPRING COMPRESSORS Heavy Duty U-Joint Puller Fuel Tank Lock Ring Tool DOOR SPRING TOOL

#CAL-512 (Macpherson Struts)  This heavy duty tool is used to remove  Remove & install plastic fuel tank lock  Quickly remove or install door hinge
Quickly compress the coil spring to replace the HD vehicle driveline U-joints using rings from 4” to 7-1/4” w/out damage . springs.
shock absorber, spring sets, repair bent strut an impact wrench up to 1-  Channel Design allows legs to adjust  For GM cars and GM light duty trucks.
or strut tube & repair damaged spindle. inch. Disassemble and reassemble U- to fit a wide range of applications and  Use w/ a 1/2" open end or ratcheting
Instructions & safety hooks included! joint cups without heat or hammering. keeps the drive centered. box wrench.

MSRP $71.70  Larger diameter threaded shaft can #LIS-63000 #TIT-15040
SPECIAL handle U-joints that are severely seized HAND TOOLS
$39.99 and require higher force to pull and MSRP $49.95 $9.99
SPECIAL
install.
$39.99
 Major tool components are heat treat-

ed for improved strength and durability. S-CAM AIR BRAKE SPRING TOOL

 Smoother thread allows for a lower,

 Safely replace brake shoes on heavy-
more consistent effort to rotate shaft.

duty tractors and trailers.

 Designed to fit all Class 7 and 8 7 PIECE NUTDRIVER SETS

 Simply hook the retaining spring loop
#CAL-510 trucks, including a wide variety #IMP-18-ND7 (SAE) and press down against the axle

Removes and installs coil springs quickly & of drivelines from + 3/16” - 1/2”
safely. Compress coil springs on all passen- Spicer and Meritor, #OTC-5081
ger cars and pick-up trucks. Instructions making shop #IMP-18-ND7M (MM) MSRP $99.95
operations more
Included! + 5mm - 12mm SPECIAL
MSRP $91.15 efficient and $7.99 $89.99
SPECIAL reducing cost.

$44.99 #OTC-5190A
$359.99

CAULKING GUNS
MacPHERSON
STRUT SPRING COMPRESSOR Reversible Impact Driver Set #IMP-45-CGK

Compatible with:  Use to loosen and tighten screws, (Skeleton Body)
 Now w/ acme threads & economically Spicer 1610, 1710, 1760, 1810, 1880
priced. Spicer SPL 140, 170, 250 Life Series nuts and bolts, w/ special handle to
reduce risk of injury when striking driver
 Use w/ impact wrench or hand tool ON or Meritor 16N, 17N, 18N, 1710, RPL 20, w/ hammer.
OFF the vehicle. and 25 Permalube Series
 Has 8 standard & long length
#TOO-63000 interchangeable bits.

MSRP $49.95 Battery Carrier

SPECIAL  Use to lift and install most top post and #TOO-14950
$44.99 side terminal batteries. Designed to $29.99 #IMP-45-CGR
transfer lifting force to a secure hold on
the battery; teeth on jaws offer a secure (Ratchet Type)
grip.
Vinyl strap resists
battery acid and
will not conduct
electricity.
MacPherson #OTC-4620
Strut Alignment Level $11.99 3/8" DRIVE IMPACT DRIVER SET
YOUR CHOICE
 Use to restore a vehicle's camber setting #IMP-18-ISD38 $4.99
after strut repair or installation, which allows $9.99
vehicle to be safely driven before a more 9pc Brake Lining Rotary Spot Weld Cutter
precise wheel alignment can be performed.
Thickness Gauges  Remove spot welds from sheet metal

#TOO-61800 Allows Brake Pad Wear to be w/ Double sided 3/8” & 1/4” blade w/
MSRP $36.95 Accurately and Consistently retractable point.
SPECIAL Measured without Guessing.  Arbor fits all 1/4” Drills

$29.99  Color-coded gauges match SAE or * Replacement 3pc Double Sided
Metric rec.’s for brake pad replacement.
Cutting Blades #TOO18025.

Master Inner Tie-Rod Tool Set  Check both straight on or a 90° angle #TOO-18000
to the rotor with offset tips. $12.99
 Includes: 9 crowsfeet to work on many SHAFT IN SEAL PULLER
applications on cars & light trucks, w/ sizes: #LIS-81850 Removes cam shaft and crank shaft

29mm, 1-3/16", 1-1/4", 32.5mm, 1-5/16", MSRP $25.73
33.6mm, 1-3/8", 1-7/16", and 1-1/2". The SPECIAL seals without damage to the shaft.

inner tie rod can be removed and installed w/ $19.99 #LIS-58430
out removing the rack. SPECIAL

#LIS-46800 $19.99 Ford Glow Plug Harness Puller
MSRP $149.95
SPECIAL  Helps prevent damage to the harness
$129.99 and connector rail. It features a thumb
tab and a textured highly visible grip that
25-Blade 12” Feeler Gauge provides a better grip on the tool when
 For Long Reach Applications. 9pc Flexible Driver & Bit Set removing the harness. The harness is

 Sizes Include: .0015, .002, .003, .004,  CrV blade w/ magnetic tip. fragile and can break, but with a better
grip the technician will have more con-
.005, .006, .007, .008, .009, .010, .011,
.012, .013, .014, .015, .016, .017, .018,  Ergonomic cushioned handle. trol when removing the harness. Made
 Set includes:(1) Spring tube (215 mm)
.019, .020, .021, .025, .027, .030, (4) Slotted: 4mm, 5mm, 6mm of stainless steel for rigidity and
durability.
3/8” Dr. INNER TIE ROD TOOL and .040-inches (3) Phillips: PH1, PH2, PH3 #LIS-37370

#CTA-A311 (2) Star: T15, T20
 Removes inner tie rods without touching #TIT-12227 SPECIAL
outer tie rods. $19.99 $10.99
 works on 1.25” to 2” tie rods MSRP $12.55
SPECIAL
with flats and
smooth tie rods. $8.99

#AST-78812
SPECIAL
$11.99