Page 73 - Q3 2018 Tools News

ASORTED PULLERS
GRIP-O-MATIC PULLERS GEAR & BEARING PULLERS FLANGE TYPE PULLER

Knife like edges fit snugly behind part being pulled.  Pulls harmonic balancers, timing gears, & other parts
#OTC-1020 #OTC-1122 having tapped holes.

2 jaw; 1-Ton. (Works w/ a 5 ton  Includes attachment cap screws.
2 ⅛" max. reach, 3¼" max. spread Grip-O-Matic or Push-Puller)
MSRP $53.95
$49.99 #OTC-518
SPECIAL
#OTC-1022 MSRP $53.95
2 jaw; 2-Ton. $49.99 SPECIAL

3 ⅜" max. reach, 4" max. spread #OTC-1123 $49.99
(Works w/ a 7 or 10 ton
$39.99
Grip-O-Matic or Push-Puller) SPECIALTY TOOLS
#OTC-1023
Reversible, 2/3 way jaws, 2-Ton. MSRP $101.95 PITMAN ARM PULLER
SPECIAL
3 ⅜" max reach, 4¾” max spread.
$94.99  Adjustable w/ replaceable forged jaws.
$59.99  Two clamp bolts lock jaws

#OTC-1024 5 TON BAR TYPE PULLER on pitman arm.
Reversible, 2 jaw, 5-Ton. AND BEARING SEPARATOR SET  Can perform other pulling jobs.

3 ¼" max reach, 6” max spread. #OTC-7311A
 Combines two popular bearing “splitters" (2" & 3"), MSRP $90.95
$49.99 SPECIAL
four sets of hex push-puller legs and a bar-type puller
#OTC-1027 head w/ a 9/16" forcing screw. $79.99
Reversible, 2/3 way jaws, 5-Ton.
5½" max. reach, 7" max. spread #OTC-4518
MSRP $142.95
$79.99 5pc Alternator Decoupler Pulley Kit
SPECIAL
#OTC-1035 Remove & Install many ADP’s
2 jaw; 7-Ton. $129.99 on popular vehicles in the U.S.

5" max. reach, 9" max. spread  To remove these pulleys, the shaft coming from the
alternator needs to be locked in place while the pulley
$99.99 is spun either clockwise or counter clockwise, depends

#OTC-1038 MULTI PURPOSE BEARING on manufacturer.
Long, 2/3 way jaws; 7-Ton. Set Includes the Following:
8¾" max. reach, 11" max. spread AND PULLEY PULLER SET H22 x 33T, H17 x H19,
H10 x 70mm,
 Set includes drop-forged components, used in a
$119.99
variety of combinations. 12mm x 75mmL x T50,
#OTC-1041  Spread: 3" to 5". & Spline M10.
2/3 way jaws, 13-Ton.  Reach: 1" to 2-1/4".
11" max. reach, 12" max. spread #CAL-756
$299.99 #OTC-4534 MSRP $29.93
SPECIAL
MSRP $224.95
HARMONIC BALANCER PULLER SPECIAL $19.99

 Works on harmonic balancers, crankshaft pulleys, $199.99 10-Ton Straight Bar Puller Set
steering wheels, and gear pulleys.
 Also works on tapped  (1) 7" Short Forcing Screw
flywheels of electric or  (1) 12" Forcing Screw
two-cycle motorcycles. PILOT BEARING PULLER  (2) Cap Screw Jaws w/ 15/16" Reach
 (2) Double Reach Wide Jaws w/ 8" Reach
#AST-7846 w/ SLIDE HAMMER  (2) Double Reach Narrow Jaws w/ 8" Reach
MSRP $76.32 Removes bearings or bushings on flywheel, pump,  (2) Extra Narrow Jaws w/ 8" Reach

SPECIAL generator, etc. Includes 1/2in. to 1-3/8in. (13mm to *rated @ 5-tons
$59.99 32mm) I.D. capacity jaws, & a 3lb. Slide Hammer  (1) 10" Spread
#CAL-28  (3) Spring Clips

MSRP $62.17 #IMC-4210
SPECIAL MSRP $199.76
SPECIAL
PULLEY PULLER & INSTALLER KIT $39.99

$149.99
Removes pressed-on alternator and power steering 9-Way Slide Hammer Puller Set
pulleys on late model GM, Ford & Chrysler engines.
Installs late model GM alternator and power steering  Pulls flange-type rear axles and most front-wheel 5-Ton Straight Bar Puller Set
pulleys including Quad 4. drive hubs. Internal and external jaws provide a variety
of combinations.  (1) 9” Spread
#AST-7874  Two & Three-way cross blocks and cone.  (2) Cap Screw Jaws w/ 3” Reach
MSRP $30.23  Grip wrench adapter and a dent puller attachment.  (2) Wide Jaws w/ 5” Reach
SPECIAL #OTC-4579  (2) Narrow Jaws w/ 5” Reach
$24.99 MSRP $139.95  (1) 9-3/4" Forcing Screw
SPECIAL  (1) 10" 2-Way Cross Arm

$129.99 #IMC-4205
MSRP $54.38
Master Harmonic Balancer Puller Set SPECIAL
$39.99
 The kit includes a standard harmonic balancer puller,
pulling screws, adapters for 3300 and 3800 GM V6 13pc Slide Hammer Puller Set
engines, and a Harmonic Damper Pulley Puller for  Combination Puller w/ 5-lb Malleable Steel Slide NON-SLIP Pulley Puller & Installer

Chrysler, GM, Mitsubishi, & Dodge. Includes new inter- Hammer. Removes pressed-on alternator, power steering pulleys
changeable puller jaws for 3.6L V6 Chevrolet Camaro  Drop-Forged Steel Pullers & Attachments. and air pump pulleys on
and Dodge 5.7L Hemi. late model GM, Ford
 Fully-Hardened Shaft & Accessories.
#LIS-54810  Converts into a 2 or 3 Jaw Internal/External Puller & Chrysler engines.
MSRP $234.28 for Reaching Tight Areas. Installs late model
SPECIAL GM alternator and
$199.99 #IMP-16-SHP13 power steering pulleys
including Quad 4.
$79.99 #LIS-39000
MSRP $76.95
SPECIAL
$64.99