Page 75 - Q3 2018 Tools News

UNDER CAR KITS & FLARING TOOLS
IN-LINE FLARING SETS Harmonic Balancer Installer Ford Manifold Drill Template

 Lines the adapters, cone & tube in a perfect line,  Includes: driving screw, thrust bearing, and (12)  Designed to remove broken exhaust manifold studs
making perfect flares every time. threaded adapters necessary to work on a wide range on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford
 Reduces the chance of the tube slipping, while in- of domestic & some import harmonic balancers. Triton engines without damaging the cylinder head.
creasing the overall life of the clamp by not wearing the  (4) long adapters for use on Dodge Hemi, Generation Interchangeable plates and alignment pins help center
down teeth. III & IV GM motors, plus some Ford & Chrysler. drill on the broken stud. Depth gauge for drilling is
 Slender low profile allows user to make flares on the  The 1.75" spacer helps w/ marked on the template. The stud extractor is then
vehicles. deep harmonic balancers. used to remove the broken stud.

#LIS-68500
#CAL-154 (Metric) #LIS-53760 MSRP $129.95
- 4.75mm, 5mm, & 6mm MSRP $174.55 SPECIAL
SPECIAL SPECIALTY TOOLS
#CAL-164 (SAE) $99.99
- 3/16”, 1/4”, & 5/16” $129.99

MSRP $50.02
SPECIAL
YOUR CHOICE
$34.99

MASTER STEERING WHEEL SERVICE SET
 Complete steering wheel service set with all of the
tools you need to remove steering wheels on most of
today's vehicles.
 Includes a forged puller flange with 5 sets of hard- In-Line Dowel Pin Puller Sets
Hydraulic In-Line Flaring Tool ened hex head bolts for 2 or 3 way pulling configura- Extracts dowels w/out the use of a slide hammer, elimi-

tions.
 Combines features of hydraulic and in-line flaring  Also includes a set of steering wheel puller legs for nating the cost as well as the effort and potential hand
tools to give an incredibly easy-to-use tool that saves steering wheels without tapped holes and a steering injury. Can be used w/ an air or traditional ratchet.
time and money! wheel pivot pin remove.
 Does single, double and bubble flares w/ option to  Covers all lock plates and steering columns. SAE

expand into quick connect fittings. #CAL-95200
 SAE Sizes: MSRP $187.88
+ 3/16”, 1/4”, 5/16” 3/8” #OTC-7984 SPECIAL
 Metric Sizes: MSRP $179.95 $139.99
+ 4.75mm, 6mm, 8mm SPECIAL

#CAL-166 $144.99
MSRP $221.52
SPECIAL
$149.99

METRIC

#CAL-95300
MSRP $194.10
SPECIAL
MASTER IN-LINE FLARING SET $139.99

DOUBLE FLARING TOOL KITS  The In-Line Flaring Tools unique design locks the
adapters cone and tube in a perfect line making perfect
 This 45 degree double flaring tool set is designed to factory flares every time with less risk of breaking
withstand the high pressure necessary to double flare adapters.
soft steel tubing as well as single flare soft copper
aluminum and brass tubing.  With the clamp and set screws putting pressure di-
rectly over the tube you greatly reduce the chance of
 Sizes: 3/16”, 1/4”, 5/16” 3/8” & 1/2”
the tube slipping from the clamp. Also this increases
#CAL-153 the overall life of the clamp by not wearing down the
+ 4.15mm, 5mm, 6mm, teeth inside from repeated slipping.
8mm, & 10mm  The slender low profile design of this tool allows the MASTER SET
user to make flares on the vehicle and in tight spaces.
#CAL-163 Flares can be achieved along frame rails or areas in the #CAL-95400
+ 3/16”, 1/4”, 5/16”, engine compartment saving the user time from having MSRP $296.63
3/8”, & 1/2” to remove components or complete lines to make re- SPECIAL

SPECIAL pairs. $199.99
YOUR CHOICE  Set includes everything needed to do the following:
3
5
3
$39.99 + ⁄ 16“, ⁄ 16“, ⁄ 8” Double and Single Flares
+ 4.75mm, 6mm, 8mm Double and Bubble Flares

#CAL-165
Universal Hydraulic Flaring Tool Set MSRP $104.32
SPECIAL
 The Kit Fabricates
+ GM Fuel Line Flare, Brake & Transmission Lines - $69.99 DOUBLE FLARING TOOL KIT
5/16” & 3/8”
+ Push Connect 1/4”, 5/16” & 3/8”  Designed for double or single flare in copper, alumi-
+ Flare/Double Flare - 3/16”, 1/4”, 5/16”, 3/8”, & 1/2” num, soft steel brake line, and brass tubing (to 45 de-
+ Metric Bubble Flare - 4.75, 6, 8, & 10mm grees). Includes five adapters 3/16" through
1/2" (4.8mm through 12.7mm).
#MAC-71475PRC  Forged yoke made of heat-treated steel.
MSRP $604.70 #OTC-4503
SPECIAL SPECIAL
$449.99 $39.99