Page 40 - Quicksilver Marine Parts Guide (2020) - 8M0163275

SHOP PRODUCTS FOR ENGINE ASSEMBLY AND MAINTENANCE

SPECIALTY LOCTITE GASKET REMOVER

FUEL INJECTION PRO INJECT-R CLEANER

92-809828 1
Removes baked‑on gaskets, gasket cements, form‑in‑place gaskets, carbon
deposits, oil, grease and paint. Use extreme caution around painted surfaces.
Non‑corrosive to aluminum.
Priced individually, sold @ multiples of 10
532 ml (18 fl oz.) spray can
92-8M0062765 LOCTITE ODC-FREE CLEANER & DEGREASER
This fluid restores injectors to their original spray pattern, helps prevent recurring
problems, and reduces intake and port deposits. Used in canister‑type cleaning
devices.
Note: Not for use as a fuel additive; do not pour into fuel tank.
For professional use only. Use in Mercury pressurized injector cleaner tool
91‑898263A01. Consult Instruction sheet (comes with tool) 90‑898266 for proper MAINTENANCE SHOP PRODUCTS FOR ENGINE ASSEMBLY AND
use.
Priced individually, sold @ multiples of 12
473 mL (16 fl oz) can
FUEL INJECTION CLEANER TOOL
92-809827Q01
Removes grease, oil, lubrication fluids, metal cuttings, and filings from parts,
equipment and machinery.
Use as a spray or in immersion cleaning processes, at room temperature or
heated. Recommended as a final pre‑assembly cleaning treatment for all surfaces
bonded with adhesives.
Priced individually, sold @ multiples of 12
444 ml (15 oz) spray can

THREAD TREATMENT
91-898263A01 LOCTITE® 222MS® THREADLOCKER
• Connects directly to your shop air supply. When used with recommended solvent,
will clean injectors more effectively than aerosol methods.
• Includes gauge, hose, instructions, and Tools & Techniques manual.
SURFACE PREPARATION
LOCTITE PRIMER N

92-809818
Ideal for fastener diameters of 1/4 in. (6mm) and smaller, long engagement length
fasteners and components requiring occasional adjustment.
Threadlocking: Best suited for metals that rust and the parts are not
pre‑assembled.
Low strength formula for easy removal.
10 ml (.3 oz) plastic bottle
92-809824
Excellent general purpose surface preparation and curing catalyst. Reduces fixture
time for most sealants to 5 to 30 minutes; full cure is 24 hours. Used with locking,
retaining, pipe and gasketing compounds.
129 g (4.5 oz) spray can

Marine Engine Parts 35