Page 197 - Latin America Accessories Guide (2020) - 8M0163252
P. 197

MERCRUISER



            CHECK VALVE KIT                                     PROPELLER SHAFT COUPLERS FOR MIE ONLY

            CHECK VALVE KIT                                     Includes set screw and through bolts.

                                                                PROPELLER SHAFT COUPLER










                 864206A02
            Prevents the discharge of engine cooling water through the drive unit during short
            term storage conditions.                                  79476A 1
            Fits 2005‑2015 MCM V‑8 (305, 350 & 377 cid) MPI Bravo engines with standard  5 in.(127 mm) diameter flange, 1 in.(25 mm) diameter bore
            cooling and Gen III fuel cool (s/n 0W060000 thru 2A455878). Not for use with Axius
            engines.                                            Fits Borg Warner 71 series Inline ‑ 1.5:1, 2:1, 2.5:1, or 3:1 ratio; Borg Warner 71
                                                                series V‑Drives; all 72 series; and all Hurth series transmissions
            CHECK VALVE KIT                                           79476A 4
                                                                5 in.(127 mm) diameter flange, 1‑3/8 in.(35 mm) diameter bore
      MERCRUISER                                                series V‑Drives; all 72 series; and all Hurth series transmissions
                                                                Fits Borg Warner 71 series Inline ‑ 1.5:1, 2:1, 2.5:1, or 3:1 ratio; Borg Warner 71
                                                                      79476A 5
                                                                5 in.(127 mm) diameter flange, 1‑1/2 in.(38 mm) diameter bore
                                                                Fits Borg Warner 71 series Inline ‑ 1.5:1, 2:1, 2.5:1, or 3:1 ratio; Borg Warner 71
                                                                series V‑Drives; all 72 series; and all Hurth series transmissions
                                                                      79476A 6
                                                                5 in.(127 mm) diameter flange, 1‑3/4 in.(44 mm) diameter bore
                                                                Fits Borg Warner 71 series Inline ‑ 1.5:1, 2:1, 2.5:1, or 3:1 ratio; Borg Warner 71
                                                                series V‑Drives; all 72 series; and all Hurth series transmissions
                 864206A03
            Prevents the discharge of engine cooling water through the drive unit during short  GEAR HOUSING REPLACEMENT SKEGS
            term storage conditions.
            Fits 2005‑2015 MCM V‑8 (305, 350 & 377 cid) MPI Bravo engines with closed  REPLACEMENT SKEG
            cooling and Gen III fuel cool (s/n 0W060000 thru 2A455872). Not for use with Axius
            engines.
            OPTIONAL FRONT ENGINE MOUNT
            FRONT ENGINE MOUNT






                                                                      90185A 1
                                                                Will not fit original Alpha One drives
                                                                For MCM Alpha One Gen II drives (s/n 0D469859 and above)
                                                                REPLACEMENT SKEG

                  76409F 1
            6‑1/2 in.(165 mm) centers by 5‑7/8 in.(149 mm) high.
            Fits MCM 120, 140, 2.5L & 3.0L/LX








                                                                     815632A02
                                                                For MCM Bravo One & Bravo Three drives



            188                                       Phone: 954-744-3500; Fax: 954-744-3535; E-Mail: miami@mercmarine.com
   192   193   194   195   196   197   198   199   200   201   202