Page 544 - Latin America Accessories Guide (2020) - 8M0163252

MECHANICAL REMOTE CONTROLS

SIDE MOUNT REMOTE CONTROL
MSC 4000 SIDE MOUNT - MANUAL START, W/
SWITCH

These controls are for Outboard engines and can be mounted on the
Port or Starboard side. These controls feature an ignition stop switch
and lanyard stop switch only.
SIDE MOUNT REMOTE CONTROL

881170A 7
This control features a non ‑ power trim handle with a 15 ft.(4.58 m) harness. This
control does not have a warning horn.
Fits Mariner 30 to 55 HP (Japanese origin) except 30/40 HP (2 cyl.) with integral oil
injection.
GEN I cables must be used.
SIDE MOUNT REMOTE CONTROL

881170A 4
This control is for manual start models and has a 20 ft.(6.1 m) harness. The control
features a Toggle switch for remote shut off of the engine.
Fits current pull style throttle, manual start Mercury/Mariner 6/25 HP, 30/40 HP (2
cyl.‑ U.S. origin), 40 (3 & 4 cyl.) to 45 HP, 8/9.9, 15/20 HP FourStroke models
(1996 and newer), and Force 25 HP (3 cyl.)
For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be
used.
For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20
FourStroke engines will use GEN I cables.
GEN I cables must be used on other engines.
881170A 6
881170A12 This control is for manual start models and has a 20 ft.(6.1 m) harness. This control
This control features a non ‑ trim handle and a 15 ft. (4.58 M) harness with Amp features a push throttle cable operation and a Toggle switch for remote shut off of
connector and will direct connect to the engine models below without the use of an the engine.
Adapter harness. Fits older push style throttle Mercury/Mariner 20/25 HP (U.S. S/N 0G044026 and
For MY2005 and newer, 8/9.9, 15/20 HP FourStroke Outboards with electric start below; Belgium S/N 9807908 and below) and Force 9.9/15 HP (1997 and older).
and non‑trim.
For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be
used. MSC 4000 SIDE MOUNT - MANUAL START W/ NO
For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20
FourStroke engines will use GEN I cables. SWITCH
GEN I cables must be used on other engines.
These controls are for Outboard engines and can be mounted on the
Port or Starboard side. The controls do not include switches or harness.

SIDE MOUNT REMOTE CONTROL

881170A 8
This control is for manual start models.
Fits Mercury/Mariner 4/5 HP and Mariner 8/55 HP (2 cyl.)
GEN I cables must be used.

2020 Mercury Precision Parts & Accessories Guide 535 MECHANICAL REMOTE CONTROLS