Page 85 - Latin America Accessories Guide (2020) - 8M0163252

OUTBOARD

4 FT. FUEL LINE ASSEMBLY - NO CONNECTORS PRIMER BULB ASSEMBLY

OUTBOARD

32-8M0061812 8M0061876
Low permeation hose 4 ft. (1.22 m)line with no connector on one end and an Using materials resistant to the chemistry of today's fuels, this bulb is designed to
"EPA‑MERC‑PB15" primer bulb on the other end. Bulb will perform at ‑15 Degrees remain pliable longer. Two hose clamps are included. Only Mercury/Quicksilver
C (5 Degrees F) after 6 weeks of exposure to fuel. bulbs will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs
Standard universal 5/16 inch (8 mm) I.D. fuel line will adapt to a variety of will perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
EPA‑2011 uses by hard plumbing or adding connectors as desired. This bulb is a 2011 EPA Certified low permeation bulb. For use with our gray color,
5/16 in. (8 mm) I.D. fuel line & 3/8" I.D. fuel line.
BULK FUEL LINE Priced individually, sold @ multiples of 4
Mercury Branded, Box Point of Sale Packaged.
8M0061875
Using materials resistant to the chemistry of today's fuels, this bulb is designed to
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
This bulb is a 2011 EPA Certified low permeation bulb. For use with our gray color,
5/16 in. (8 mm) I.D. fuel line & 3/8" I.D. fuel line.
Priced individually, sold @ multiples of 4
Quicksilver Branded, Box Point of Sale Packaged.
32-8M0038500 FUEL LINES AND PRIMER BULBS - (NON-US
Low Permeation hose, 5/16 in. (8 mm) I.D. x 100 ft. (30.5 m) spool. (EPA
compliant). COMPLIANT)
Fits fuel line assemblies for delivering fuel from the fuel tank to the engine fuel
connector. These assemblies may be used in all applications not governed by the
32-8M0038563 US‑EPA 2011 regulations. If those regulations do apply, please refer to
Low Permeation hose, 3/8 inch (9.5 mm) I.D. x 100 ft. (30.5 m) roll. a 2011 US Compliant Section either here or in an Accessories Guide for
EPA Compliant. applicable assemblies complete with provision for a pressurized fuel
tank and low permeation primer bulb.
PRIMER BULB ASSEMBLY
8 FT. FUEL LINE ASSEMBLY

8M0052976
Using materials resistant to the chemistry of today's fuels, this bulb is designed to 32-8M0054323
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will Low Permeation (EPA compliant) hose has 1/8" NPT threaded fitting on engine end
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel. and 1/4" NPT threaded fitting on the tank end. A non‑EPA compliant primer bulb is
This bulb is a 2011 EPA Certified low permeation bulb. For use with 1/4 in. (6.35 included in this 8 ft. (2.44 m) assembly.
mm) I.D. fuel line. Fits varying applications using the older style twist type disconnects at the engine
Priced individually, sold @ multiples of 4 end and either a bayonet or thread‑in fitting on the tank end. This assembly may
be used in all applications not governed by US‑EPA 2011 regulations.
Mercury Branded, Box Point of Sale Packaged. Quicksilver Branded, Box Point of Sale Packaged.
8M0052975
Using materials resistant to the chemistry of today's fuels, this bulb is designed to
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
This bulb is a 2011 EPA Certified low permeation bulb. For use with 1/4 in. (6.35
mm) I.D. fuel line.
Priced individually, sold @ multiples of 4
Quicksilver Branded, Box Point of Sale Packaged.

76 Phone: 954-744-3500; Fax: 954-744-3535; E-Mail: miami@mercmarine.com