Page 9 - Rigging and Accessories Guide (2022) - 8M0187689

HOW TO USE YOUR OEM RIGGING AND ACCESSORIES GUIDE

• MerCruiser ID located on bottom tray (skid).
• 500‑600HP Outboard Rack white ID Tag is located above the disassembly instruction decal.
Mercury’s preferred carrier is responsible to ensure return delivery.
Record any damage to the rack or container on the Bill of Lading.
Dealers must retain a copy of the Bill of Lading for their records. (Note: All serial numbers of racks/containers being returned must be on the Bill of Lading and listed
clearly).
For Shipments Greater Than 15,000 Pounds or Over 25 Cubic Feet of Trailer Space
Call 920‑929‑5838 to arrange pick up with your Sales Account Representative.
Additional Notes:

• Racks and Containers need to be collapsed and stacked for return shipment.
• Collapsed 175‑450HP Outboard Racks weigh 285 pounds each and may be stacked 8 high.
• Collapsed MerCruiser containers weigh 220 pounds each and may be stacked 10 high.
• Collapsed 500‑600HP Outboard Racks weigh 790 pounds.
• Disassembly instructions are on a decal that is placed on each crate.
Please be aware that Transom Cradles need to be returned back to Mercury along with the empty MerCruiser containers.
There should have been (1) transom cradle in each MerCruiser engine container. When Mercury ships you a MerCruiser engine, inside the Engine container would be the
sterndrive engine and the transom, which is nestled inside of this transom cradle to protect it during shipment.
The Transom Cradle has a white label stating to return back to Mercury Marine. Next, with these Transom Cradles, we'd like them to be stacked up together and then all
placed inside of an empty MerCruiser engine container.
Please see photos on MercNET by selecting Resources – Mercury–US Boatbuilder Policy & Procedures Manual –Section 3
Non‑Warranty Product Returns from the Handy Tools section.
Intentional damage to any part of the returnable container/rack or failure to return all components will result in a debit for the replacement cost of the component(s). Billing
for intentional damage will occur upon receipt of the container/rack by Mercury.
Propeller and Hub Exchange Program
The form and directions for this program are found on MercNET under the following path:
Handy Tools>Forms>Sales Forms>Propellers>Propeller / Hub Exchange Program

h Place Orders | Print Invoices | Register Product | Pay Online