Page 156 - US ACCESSORIES GUIDE (2019)

MERCRUISER

EXHAUST ELBOW/RISER KITS (8.1L & 8.2L, NON- EXHAUST ELBOW/RISER KIT - 8 IN.(203 MM)
EC, 2001 & NEWER)

Raises the height of the engines exhaust system to prevent water from
entering the engine through the exhaust system. Maximum height of 8
in.(203 mm) available. For use on MCM/MIE 8.1L & 8.2L
Non‑Emissions Control engines only.

EXHAUST ELBOW KIT - 2 IN.(51 MM)

8M0119280 1375A00 1964.29
If the engine has a standard rise elbow already on engine and needs another 8 in.
(203 mm) rise, order this kit. The standard rise elbow is removed and replaced with
a 2 in.(51 mm) rise elbow and a 6 in.(152 mm) riser kit which are included in this
kit.
Fits MCM/MIE 8.1L & 8.2L non‑EC engines
EXHAUST "Y" PIPE KIT

862974A05 832A05 1188.64
This elbow is 2 in.(51 mm) higher than the standard elbow. This replaces what was
the 3 in.(76 mm) riser kit used on previous big block engines.
Fits MCM/MIE 8.1L & 8.2L non‑EC engines MERCRUISER
RISER KIT - 6 IN.(152 MM)

98-8M0117125 513A10 733.00
WARNING: Cancer - www.P65Warnings.ca.gov
Used to convert MCM 8.1L & 8.2L engines with thru transom exhaust to thru prop
exhaust.
Also requires the use of intermediate elbow kit in conjunction with this "Y" Pipe Kit.
For 8.1L & 8.2L non‑Emissions Control engines, use 44267A02 or A03. For 8.1L
Emissions Control engines, use 44267A04, A05, A06, A07 or A08. For 8.2L
Emissions Control engines with three catalyst exhaust manifolds, use 879288A12,
98-8M0124068 495A60 708.00 A13, A14, A15 or A16.
This riser will raise the elbow an additional 6 in.(152 mm). If the engine has a 2 in. Fits all MCM 8.1L & 8.2L sterndrive engines, except 2012 & newer 8.2L EC
engines with single catalyst exhaust manifolds.
(51 mm) elbow already on engine, but only needs an additional 4 in.(102 mm) rise,
this kit will not work. Order 862354A 1 Exh. Elbow/Riser kit instead. INTERMEDIATE ELBOW KIT
Fits MCM/MIE 8.1L & 8.2L non‑EC engines
EXHAUST ELBOW/RISER KIT - 6 IN.(152 MM)

44267A02 263A20 376.00
Used in conjunction with Exhaust "Y" Pipe kit 8M0117125 to convert engine to thru
prop exhaust.
862354A04 1326A40 1894.86
Order this kit if the engine has a 2 in.(51 mm) elbow already installed on it, but only Fits MCM 8.1L & 8.2L non‑EC sterndrive engines with exhaust risers 2 in. (51 mm)
to 8 in. (203 mm) high.
needs an additional 4 in.(102 mm) rise. The 2 in.(51 mm) elbow is removed and
replaced with the standard rise elbows and a 6 in.(152 mm) riser kit which are
included in kit.
Fits MCM/MIE 8.1L & 8.2L non‑EC engines

2019 US Accessories Guide 143