Page 615 - Quicksilver Product Guide (2020) - 8M0163242

GEAR CASE COMPONENTS Seal Kit Seal & Bearing Kit Clutch/Cam Pinion/Forward Reverse Gear Forward Bearing (If

MERCURY®/MARINER®/FORCE® V-200 DFI Counter Rotation 1.75:1 USA 0G386496 - 0G437999 26-816575A 5 31-803808T 1(2) Follower Assy. Gear Assy (with N.L.A. Required Separate)
Model
Serial # Range

Model Notes
(w/o forward brg.)
forward brg.)
(1)
N/A
N/A
N.L.A.(3)
Ratio Ratcheting Style
0G438000 - 1B504988 26-816575A 4 N.L.A.
Std. Rotation 1.75:1 Non-
43-859322A 1 31-828439A 2
N/A
V-200 DFI
USA
43-859321A 3
Ratio Ratcheting Style
43-828696T 2 N/A
0G438000 - 1B504988 26-816575A 4 N.L.A.
N/A
USA
N.L.A.
V-200 DFI
Counter Rotation 1.75:1
Ratio Non-Ratcheting Style
(2) It may be necessary to change the forward gear spacer. Follow the service manual guidelines to determine correct components.
(3) Use only with C-2 casting. For C-3 refer to later s/n range.
(4) Not Sold Separately.
(5) If forward gear roller bearing measures 1.308 inch O.D. instead of 1.313 inch O.D. then two additional bearings 31-43999 will be required.
(6) If pinion is not stamped "19672", then all gears must be changed.
DRIVESHAFT - STANDARD 20 INCH TRANSOM DRIVESHAFT
DRIVESHAFT
45-826736A 1
Standard length (20 Inch transom ‑ longshaft)
45-826194A 1 DRIVESHAFT
Standard length (20 Inch transom ‑ longshaft)
DRIVESHAFT

45- 43031A 1
Standard length (20 Inch transom ‑ longshaft)
45-812731 DRIVESHAFT
Standard length (20Inch transom ‑ longshaft)
DRIVESHAFT

45-897624T
Standard length (20 inch transom ‑ longshaft)
45-854808A 1
Standard length (20 Inch transom ‑ longshaft)

606