Page 23 - LFC catalogue Metrology

metrology

Thread Depth Gauge

You can check threaded holds by inserting the shank part of the gauge into the electric screwdriver.
It provides reductions of measurement time and workload.
When the gauge is used with cordless screwdriver of Hitachi FBD3DL2 or
PanasonicEZ7410, operate the screwdriver at low speed mode with minimum torque of 0.3N•m
The width across flat of the hex drill bit shank is 6.35mm.
Please note that the threaded part of the gauge could wear heavily,
which depends on the way you use it.
Reducing
Time !

Simple
Bit Plus setting ! Easy
checking !
Thread plug gauge with hex drill bit shank.

Gauge Neck Total
Thread Size length length length
M3x0.5 4.5 5.5 55
M4x0.7 6 6 57
M5x0.8 8 7 60
M6x1.0 8 10 63
M8x1.25 12 12 69
M10x1.5 12 18 75
M12x1.75 16 20 81
M14x2.0 16 32 93
M16x2.0 16 32 93

CPG

Threaded hole location gauge
•The thread member is based on 6H or class 2 of
No. Thread size
GO side standard can be used to inspect the pitch
80130220 CPG M3x0.5 GP2 / GP6H diameter of the thread hole.
80170220 CPG M4x0.7 GP2 / GP6H • The cylindrical member (pin gauge part) has
80210220 CPG M5x0.8 GP2 / GP6H concentricity within 0.01 and the prependicularity
80240220 CPG M6x1.0 GP2 / GP6H of its end-face is within 0.005, with respect to the
81030220 CPG M8x1.25 GP2 / GP6H thread member.
81040220 CPG M10x1.0 GP2 / GP6H • The center of both threaded hole and thread
81050220 CPG M10x1.25 GP2 / GP6H member is maintained by tightening mechanism.
81100220 CPG M12x1.5 GP2 / GP6H
81110220 CPG M12x1.5 GP2 / GP6H No. Thread size
81120220 CPG M12x1.75 GP2 / GP6H 81240220 CPG M18x1.5 GP2 / GP6H
81150220 CPG M14x1.5 GP2 / GP6H 81260220 CPG M18x2.5 GP2 / GP6H
81160220 CPG M14x2.0 GP2 / GP6H 82020220 CPG M20x1.5 GP2 / GP6H
81200220 CPG M16x1.5 GP2 / GP6H 82030220 CPG M20x2.0 GP2 / GP6H
81210220 CPG M16x2.0 GP2 / GP6H 82040220 CPG M20x2.5 GP2 / GP6H

www.lfc.co.id 023