Page 83 - CAT31D

Ground Clamps & Hubs

Armored Ground Clamps PC 5560

Used to connect armored cable to water pipe for grounding. Special
pressure bar grips armored cable insulation to decrease chances of
grounding conductor being pulled out. Cast from high strength, highly
conductive copper alloy.
Features:

• UL Listed • Bonding or Grounding
• Pressure Cast or • With Steel or Stainless
Bronze Steel Screws
CAT. UPC WIRE RANGE DESCRIPTION SCREW PIPE SIZE STD MSTR WT/STD
NO. TYPE
21B* 10030 8 Sol to 4 Str Prsr Cast Brs Plated Steel 1/2 to 1” 25 250 5.09#
21M 10035 8 Sol to 4 Str Prsr Cast Mlbl Finish Steel 1/2 to 1” 25 250 5.09#
26 10040 8 Sol to 4 Str Bronze Steel 1/2 to 1” 25 250 5.83#
DLI26 28091 8 Sol to 4 Str Bronze Stainless 1/2 to 1” 25 250 5.63#
Lay in Feature Steel
26SWV 10042 10 Sol to 6 Str Bronze Swivel Type Steel 1/2 to 1” 25 125 9.33#

28 10045 8 Sol to 4 Str Bronze Steel 1-1/4 to 2” 25 250 11.63#
28SWV 10046 10 Sol to 6 Str Bronze swivel Type Steel 1-1/4 to 2” 5 3.05#
1102* 10047 8 Sol to 4 Str Bronze Steel 2-1/2 to 4” 5 6.60#
1103* 11048 8 Sol to 4 Str Bronze Steel 4-5-6” 5 9.92#

26SWV Includes a pressure bar that swings 360° for easy adjustment
28SWV Includes a pressure bar that swings 360° for easy adjustment
* Non UL Approved Fittings & Stampings

Hubs PC 5580

Hubs are used with ground clamps to connect rigid conduit to water C D
pipe for grounding. 360° swing type hub provides flexibility. They are
cast from high strength, highly conductive copper alloy with zinc plated
Fittings & Stampings
screws.
CAT. NO. UPC SIZE PHOTO GROUND WIRE STD MSTR WT/STD
Features:
HUB50L 10171 1/2” C 10 Sol to 6 Str 25 250 5.04#
HUB75L 10176 3/4” D 10 Sol to 2/0 Str 25 250 7.23# • UL Listed
HUB100L 10181 1” D 10 Sol to 3/0 Str 10 100 3.00# • Bronze

Ground Rod Drivers PC 6550

Install ground rod from ground level. Sliding action drives rod without
need of hammer. Driver will not deform end of rod. Heavy duty
construction provides maximum driving forces, while soft rubber
ergonomic grip provides user comfort.

CAT. NO. UPC DESCRIPTION STD MSTR WT/STD
Features:
GRD58 24101 5’ Driver with insert for 5/8” 1 1 22.34#
Ground Rod • No Need For Ladders
GRD34 24102 5’ Driver with insert for 3/4” 1 1 22.13#
Ground Rod Or Sledge Hammers!
• Caution! Always Wear
Insert Only Eye Protection
GRDI58 24103 Insert only for 5/8” 1 1 5.73#
Ground Rod
GRDI34 24104 Insert only for 3/4” 1 1 5.63#
Ground Rod
C20 C21
“BUILDING A BETTER BRAND” LHDOTTIE.COM P:323-725-1000 F:323-721-0000

*Dottie-GREEN-R2.indd 21 7/1/15 4:17 PM