Page 101 - Midwich_ AU_Ecler_Audio_Product_Guide_2021

ACCESSORIES ACCESSORIES
Product Accessories Audio Cables and Others

WP24-PSU WPPSU ETH232AD TR2-70 CNXXLRXLR1 / 5 / 10 CNXEBEB1 / 2M5 CNXEBRCA1 CNXXLRFEB

1UHRMKIT 2UHRMKIT PUM3 VEORACK19 CNXRCAEBAD CNXMJXLR2 CNXEBLINK4 CNXAC8RM

LABI1-SWK LABI1-SPC LABI1-CFC MBSTAND MDSTAND WPa2FMBOX WPa2SMBOX

Ecler WP24-PSU is a 24VDC 0.5A external PSU. International AC plugs set. Coaxial connector (+ center),
compatible with eMPAGE, DN44BOB and WPaMIX-T.

WPPSU is an external, universal AC/DC converter for the DC supply of remote panels and devices. Compatible CNXXLRXLR1/5/10 is a 1m/5m/10m length XLR-XLR cable.
with all the WPa/WPNET series panels requiring external DC power supply (except WPNETTOUCH).
CNXEBEB1/2M5 is a 1m/2,5m length Euroblock bal.- Euroblock bal. cable.

ETH232AD is a serial interface that allows bidirectional transparent transmission between RS-232/422/485 CNXEBRCA1 is a 1m length 2xEuroblock bal. - 2xRCA Male/female.
and Ethernet. It includes a setting webpage for Ethernet and Serial customized settings.

TR2-70 is a transformers kit including 2 transformers for the CA200z's amplified outputs' conversion: 4 Ω CNXXLRFEB is a 0,5m length XLR female bal. - Euroblock bal.

to 100V or 70V (high impedance). CNXRCAEBAD is a RCA - Euroblock bal. adapter.
TR2-70 Kit is compatible with the optional 2UHRMKIT "in-rack" mounting accesory.
CNXMJXLR2 is a 2m lenght minijack ST to mono XLR male. Includes an internal resistance for overload protection
1UHRMKIT is a kit that enables a half-width and 1U height rack device (ePLAYER1, etc.) to be mounted into and a propper sum of the signals.
a standard width rack cabinet.
CNXEBLINK4 is a 4 Euroblock link cable,12cm between connectors. It allows to link inputs channels on
2UHRMKIT is a kit that enables a half-width and 2U height rack device to be mounted into a standard width rack multichannel amplifiers such as eGPA series.
cabinet.
CNXAC8RM is a 19" 8 x sockets power strip with ON/OFF switch.
PUM3 is a rack-mount accessory that allows to mount two half-width RU devices in 1 standard width RU
space. Mounting screws included. MBSTAND is a microphone stand with boom arm.

VEO-RACK19 is a universal 19 "rack support. Includes velcro and fixing screws. MDSTAND is a desktop microphone stand.

LABI1-SWK is a wheel kit for LABI1-SB18p subwoofer. WPa2FMBOX is a double Flush-Mount box, compatible with the WPa wall panel series. It includes a single frame
for fitting 2 adjacent panels in a twin housing.
LABI1-SPC is a nylon protection cover for LABI1-SB18p subwoofer.
WPa2SMBOX is a double Surface-mount box, compatible with the WPa wall panel series. It includes a single
LABI1-CFC is a flight case for 2 LABI1-C100i + wiring + mounting accessories. frame for fitting 2 adjacent panels in a twin housing.

100 101